Jump to content
SAU Community

Disable Vdc Correctly (Drift & Stand Stills With No Issues)

FredFrothen
 Share

Recommended Posts

FredFrothen Newbie

FredFrothen

Posted
Posted

Hey all,

Just bought a v35 350gt 03 model, picked it up fairly cheap and keen to make a profit on it. But in the mean time this VDC system really shits me, even when VDC is 'off' it only changes the parameters of the VDC algorithm which just delays the time in which it takes to interfere.

Anyway after trawling the net i found how to disable it correctly while still keeping ABS active (pulling the vdc fuse disables ABS also), many of you may already know how to do this.

Just interested to see if it's worth me making a 'How to' thread for everyone else that's frustrated by this safety feature.

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

On mine holding the VDC button in for around 10 seconds disables the VDC system to allow me to do standstill burnouts and drive on the track significantly more aggressively. It would seem the Yanks G35 do not have this feature, so they have created a hard-wired unit that does it with a switch.

FredFrothen Newbie

FredFrothen

Posted
  • Author
Posted (edited)

On mine holding the VDC button in for around 10 seconds disables the VDC system to allow me to do standstill burnouts and drive on the track significantly more aggressively. It would seem the Yanks G35 do not have this feature, so they have created a hard-wired unit that does it with a switch.

I've tried this on mine, and it still flashes 'slip' on the dash whilst drifting and brings my drift to a halt. (can do stand stills in this mode though). What year model do you have?

EDIT:

Just noticed you have an 03 model also.

Edited by FredFrothen
Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Yeah 03. I haven't tried drifting, but I can do a very mean standstill and figure 8 burnout with no disruption by the VDC system. Maybe when you drift you activate the anti-yaw system, which I believe can't be fully turned off?

  • Like 1
FredFrothen Newbie

FredFrothen

Posted
  • Author
Posted

Yeah 03. I haven't tried drifting, but I can do a very mean standstill and figure 8 burnout with no disruption by the VDC system. Maybe when you drift you activate the anti-yaw system, which I believe can't be fully turned off?

Yer that's what this mod messes with, the 'g sensor/yaw sensor'.

(Locky) Community Regular

(Locky)

Posted
Posted

when I did a skidpan in mine the slip light seemed to only come on when I used the brakes to help swing the back around

Was a lot mor obvious in the afternnon when it rained and whenever you used the brakes it would thing you are locking up so the ABS/anti slip chucked a spaz... gave up after that

GeeDog Experienced

GeeDog

Posted
Posted

When you hold it for 10 seconds - is there any indication that it's different from just turning it off? Can you actually feel the car behaving differently?

Reason I ask is I've tried both at hillclimbs & gymkhanas, and I can't feel anything different. I'm not convinced that there is a difference. I can tell you that Collingrove with VDC on is not much fun - first sign of slip & it basically cut power. Was the first run on a cold wet morning & thought I'd play safe - duh.

LineItUp Collaborator

LineItUp

Posted
Posted

Under the centre console there is a bosch sensor;

add a switch into the orange wire

be warned; you can't reactivate traction control unless you clear the code in Cipher, or restart the engine.

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

When you hold it for 10 seconds - is there any indication that it's different from just turning it off? Can you actually feel the car behaving differently?

Reason I ask is I've tried both at hillclimbs & gymkhanas, and I can't feel anything different. I'm not convinced that there is a difference. I can tell you that Collingrove with VDC on is not much fun - first sign of slip & it basically cut power. Was the first run on a cold wet morning & thought I'd play safe - duh.

No there is no indication. But I know it has turned off when I can rip a standstill skid or do figure-8 burnouts

FredFrothen Newbie

FredFrothen

Posted
  • Author
Posted

Under the centre console there is a bosch sensor;

add a switch into the orange wire

be warned; you can't reactivate traction control unless you clear the code in Cipher, or restart the engine.

^ 10 points, this was the write up i was going to do.

Probably still will for future reference, plan on doing it friday arvo or saturday. Will include pictures and dis-assembly pics from the workshop manual.

As for holding the VDC button down for 10 secs, when i do this the 'VDC OFF' light goes out.

  • Like 1
sonicii Veteran

sonicii

Posted
Posted

Joys of base model sedan. No VDC, No traction control.....Nothing. Dont have to worry about this crap. Wish you guys all the best

They all have traction control and ABS. but VDC was an option on the 250GT and 300GT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...