Jump to content
SAU Community

Recommended Posts

hye guys just purchased my 1996 series 2 r33 gtr vspec, im new to the nissans as i had a supra and know all about the 2jz but nothing about the rb26 lol so my car is white its a vspec following mods are

3inch exhaust blitz

hks boost controller

hks turbo timer

hks pod filters

boost setup from .7 to .9

ok now the problems im starting to see are the folwing

1)when you start the car after its already warmed up it starts and then drops dramatically in idle to about 2-300rpm hunts between there for 3-5seconds and then idles up at 900rpm sometimes its revs up between 900 - 1100rpm back and forth hunting and then when driven seems to be fine, the boost hold at .7 or .9 so i dont think a boost leak? but when its in vacuum i can see the needle going up and down a little bit...

2)when going in 1st and 2nd with foot lightly under acceleration it seems to backfire and missfire, and then when going full throttle the car will rev fine and then missfire/backfire through the rpm range and it looks to me like the car doesnt want to go past 5000rpm in 3rd or 4th i really have to push it but boost hold at .9

it seems its running alot rich because ive been told it spits out black smoke when driving and i can actually smell the fuel from the exhaust while driving, then all of a sudden the car starts to go hard and actually pushes and goes fine through the rpm range with no missfires or backfires?

any keen to lend a hand???

Link to comment
https://www.sau.com.au/forums/topic/430636-hey-guys-im-new-to-the-rb26/
Share on other sites

ok sweet car has done 107000kms the recent owner changed the timing belt and the sparkplugs?

also one more issue i just remembered, these brembo brakes are meant to brake pretty hard i imagine? well on this car i have 10.5 inch rims all round with 275 tires and when braking it doesnt have a stop it just continues to slow down like some sort of brake fade? example when going about 30-40kms and u hit the brake hard i imagine it should stop on the spot? well it just slows down it doesnt just have that hard braking power, recent owner said he changed the pads without machining disc i imagine these are throw out disc can only be used once? well im not sure but for a gtr im sure if u hit the brake as hard as u can the car should come to a quick stop? this one doesnt

Do you have an aftermarket ECU ?

- Take it in for a check tune

- Have the rotors machined and system bled (while their there I'm sure they will pick up any anomolies.

use trusted mechanic/shop.

First thing I do with any cars new to me is a major service (unless I have evidence it has had one recently).

Edit: Brembo's are good calipers BUT good braking requires more than just good calipers. Pads, Fluid, Rotors and bleed.

107,000kms - true or not it indicates Major Service should have occured and should have paperwork for it with your GTR.

Edited by Sinista32

2) sounds like AFMs, look up the soldering fix or try a set of known working ones.

Do you know what brake pads are on there? As mentioned, machine the rotors, full fluid flush and probably look at getting new pads (QFM HPX at a mimimum, I would get A1RM as GT-Rs are 'heavy').

thankyou guys much better then the supra forums they mock your supra and mock you a a person for not being as smart as them

i had a 500hp supra im a licensed mechanic but not in performance as its a different field just a general mechanic, im very keen on the 2jz but thought id test the rb26s man so ill do all those test and get back to you guys in the mean time if anyone lives in lugarno nsw sydney area and wants to come have a look and knows what there on about and knows the gtr 33s ver well and wouldnt mind coming to have a look at this then please let me know on inbox cheers thanks guys

regards

hesh

hye guys just purchased my 1996 series 2 r33 gtr vspec, im new to the nissans as i had a supra and know all about the 2jz but nothing about the rb26 lol so my car is white its a vspec following mods are

3inch exhaust blitz

hks boost controller

hks turbo timer

hks pod filters

boost setup from .7 to .9

ok now the problems im starting to see are the folwing

1)when you start the car after its already warmed up it starts and then drops dramatically in idle to about 2-300rpm hunts between there for 3-5seconds and then idles up at 900rpm sometimes its revs up between 900 - 1100rpm back and forth hunting and then when driven seems to be fine, the boost hold at .7 or .9 so i dont think a boost leak? but when its in vacuum i can see the needle going up and down a little bit...

2)when going in 1st and 2nd with foot lightly under acceleration it seems to backfire and missfire, and then when going full throttle the car will rev fine and then missfire/backfire through the rpm range and it looks to me like the car doesnt want to go past 5000rpm in 3rd or 4th i really have to push it but boost hold at .9

it seems its running alot rich because ive been told it spits out black smoke when driving and i can actually smell the fuel from the exhaust while driving, then all of a sudden the car starts to go hard and actually pushes and goes fine through the rpm range with no missfires or backfires?

any keen to lend a hand???

check to see what condition your blow off valve is in if its been dicked with and venting to atmo or leaking can cause these problems

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
×
×
  • Create New...