Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

We used to pay for our own, now we don't.

http://www.sauqld.com cost us (the club) time and money to maintain, http://www.skylinesaustralia.com/forums/forum/28-queensland/ costs neither (to the club.)

This is the point Tony was making.

the clubs dont pay for it, prank pays for the forums hosting (or thats the way it was) and the advertising banners at the top and bottom of the site help.

I know this. Let me rephrase:

If we were to host it externally, on another site, the club would have to fund it - like it used to.

Being here, the costs are looked after by SAU and hence doesn't cost us anything.

We used to pay for our own, now we don't.

http://www.sauqld.com cost us (the club) time and money to maintain, http://www.skylinesaustralia.com/forums/forum/28-queensland/ costs neither (to the club.)

This is the point Tony was making.

Nail. Head. Hit.

Me tired. So much liaising with different parties to fix shit.

I know this. Let me rephrase:

If we were to host it externally, on another site, the club would have to fund it - like it used to.

Being here, the costs are looked after by SAU and hence doesn't cost us anything.

But we also see ads here which pay for the site. Take ads away we would have to pay.

arent you a mechanic?

for srsly?

i installed a boost controller in the emo this morning before work.

ez.

apprentice, never really dealt with factory turbo so all the standard piping is weird and i dont wanna screw with anything so just making sure i know it goes from the compressor housing to the wastegate actuator, thats about it

ads are fine, there are minimal on here so aslong as site stays up and i dont get banned (not taking a stab or being rude just saying as long as i dont step out of line) im happy :) )

from intercooler piping > bleed valve > wastegate

But we also see ads here which pay for the site. Take ads away we would have to pay.

so? I'd rather have them then having to pay for the site directly via a subscription woudlnt you?

This nite has esaclated into an epic amount of BS!

so? I rather have them then having to pay for the site directly via a subscription woudlnt you?

 

This nite has esaclated into an epic amount of BS!

Well I pay membership so I expect a good amount of BS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...