Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

in that example, sure.

when the dump pipe is fabricated get them to make a section that can unbolt so you can seal up the exhaust and have it as a screamer but also gives you the option to plumb it back with relative ease.

some people love them forever, some people like them for a bit and then just want it to shut up.

This.. My mate had this setup

Only because the abomination is a thirsty POS.

this

Mayb I plan on making it more fuel efficiant

hop to it......there is no reason the abom should use more fuel than that falcoon.

^ this. Old cars can be good if u look after them.

AU falcon is not an old car.......its newer than your GTR! by alot. still a horrible POS

Screamer pipes with big turbs and external gates give me wood... Just a warning Scott lol

V8s cracking gate = Jizz in my pants

so true, check out the McLaren P1 Jay leno garage......that engine is wastegateerific :)

this

hop to it......there is no reason the abom should use more fuel than that falcoon.

AU falcon is not an old car.......its newer than your GTR! by alot. still a horrible POS

Bodo my AU Falcon is only 5 years older than my R32. It's certainly not that new.

Haha nope, didn't u see my hectic falcoon

Indeed I did.....still wouldnt drive it by choice. but for the price...i guess you cant argue. would still go for the Hatsu or similar small FWD cheapness instead. I miss my Madaz

I just learned somthing ( and so did the irritating p plater) the mighty mazdarati is faster than mk4 golf gti....just. got to throw 3x scissors lol

i find this hard to Believe. But then P platers are pretty bad at driving :)

Bodo my AU Falcon is only 5 years older than my R32. It's certainly not that new.

I assume you mean newer? to me an old car has a Carby :thumbsup:

Well gnite peps. Hope to get the Ant-Eater this week ;)

night Ants, hope to see it out and about soon.

 

 

 

i find this hard to Believe. But then P platers are pretty bad at driving :)

 

 

Why? The mazda makes a few kw more and the same torque and is only a smidge heavier. It also has no lag. Which I think was the deciding factor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...