Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Yes. You'll need to upgrade the brakes and get a mod plate.

Have a look at what brakes the turbo Calais came out with, if the 31 has the same size or bigger brakes and is lighter and has the same motor you can argue that a brake upgrade is not needed

i am hoping some p-plater will like my s2 silhouette and pay me loads of money so i can buy a sh1tter to allow me more budget for stopping

So if you sell it, does all if the money go towards your budget this giving you more spending cash?

Morning all. Home now. Soooo wrecked. :P

That's just plain evil! I wish I could call 1:20pm morning!

Oh that does sound bad, I had my wisdom teeth out (and had two extra for a total of 6 :0 ) but my surgeon was awesome, i was alright in 4 days, had them out on Monday and played rugby on the Sunday with no issues. I was pretty weird recovering from anesthetic too. I woke up, unplugged my heart monitor and pulled out my iv and took my self for a bit of a walk, I was half way down the hall to the elevators before they worked out where I went!

Yeah it was shitehouse! All four of mine were attached to my jawbone, my jaw was dislocated both times they were taking them out... It's crazy the way some people react to the drugs apparently most girls cry, glad I wasn't one of them although last time I was knocked out I woke up and lost my shit and got agro until I realised where I was haha

technically, yes.

this thing needs some work on the brakes and whilst the engine is fantastic, the purchase price of $1300 doesn't leave me a whole lot to spend on brakes and suspension upgrades. I DO NOT want brake fade at the track. Been there, done that, don't like it.

That's just plain evil! I wish I could call 1:20pm morning!

Yeah it was shitehouse! All four of mine were attached to my jawbone, my jaw was dislocated both times they were taking them out... It's crazy the way some people react to the drugs apparently most girls cry, glad I wasn't one of them although last time I was knocked out I woke up and lost my shit and got agro until I realised where I was haha

Didn't sleep till 5am because we were at the wedding. :)

just buy a GTR again Benno

GTR's are the DEVIL!!!!!! glad i owned mine, i ticked a box from my bucket list. I would never own one again. too heavy, too much understeer, too much money. i can go quicker in a crappy old s13 then a gtr with a bucket load spent on it.

GTR's are the DEVIL!!!!!! glad i owned mine, i ticked a box from my bucket list. I would never own one again. too heavy, too much understeer, too much money. i can go quicker in a crappy old s13 then a gtr with a bucket load spent on it.

I know I know. I will ask you a question when I see next regarding the GTR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...