Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Alledgedly everything is still running but the USB port slows down and Sean cant get any proper reading from it.

Haltech was sent back to Sydney yesterday (hopefully will get it soon) to have a look at it.

go in there man honestly. i dont know they guy but you know they havent touched it and now they claim ecu is dead. Id hate to find out they are jacking you man!

Hatlech said to Sean when he called them that this ECU has an older firmware on there and is apparently a known issue.

I asked Sean if Hatlech would replace it with a new one - hes said he doesnt know.

bottom line, is that I still have no car, and now no ECU im totally devestated with it all.

go in there man honestly. i dont know they guy but you know they havent touched it and now they claim ecu is dead. Id hate to find out they are jacking you man!

Never really thought of that Damo. I suppose workshops could pull BS like that and would not be suprised.

thats so low BTW.....

Back in the late 80s when the band was only first starting off buntas clean cut style dazzeled female onlooker to the point where photosynthesis was so popular fans start submitting their crowd shots (as seen below)

9JuyOlW.png

But by the early 90s the folk lifestyle had taken its toll on poor mr bunts and the band started to fall apart due to alcohol and drugs

hwlzo6h.png

After two stints in rehab and a rumoured romance with Michael Jackson, the band went into hiding secretly writing there controversial new album "Give me the keyboard to your heart... And your car" two years later the album was released to mixed reviews selling only 300,000 copies

uT31BcG.png

I am not convinced that is the correct use of photosynthesis.

I don't think think using radiant energy to turn carbon dioxide and water into carbohydrate is the cause of your being boring. Though according to Ants you are green so maybe you do photosynthesise

I was a bit dubious on this use as well but Video ref has called play on...7 tackles later.

Less than half mate. $29 inc Cart hire for 18 holes. Practically giving it away

Is that for 1 or 2 people?

Alledgedly everything is still running but the USB port slows down and Sean cant get any proper reading from it.

Haltech was sent back to Sydney yesterday (hopefully will get it soon) to have a look at it.

doesn't it still have a serial port as well? could of upped the baud rate on that in a pinch if it does.

  • Like 1

Never really thought of that Damo. I suppose workshops could pull BS like that and would not be suprised.

thats so low BTW.....

Go in there with a glitter cannon, that would make most people other than myself move quickly....

Unless they are like me and in which case they will be waiting in excitement for a shitload of sparkles to explode everywhere :)

(I changed my mind we can be friends)

Yippeee

go in there man honestly. i dont know they guy but you know they havent touched it and now they claim ecu is dead. Id hate to find out they are jacking you man!

My guess is that it is an excuse to buy them some time

Just no, Sean did not manage his workload well coming into two major events but he would not send an ECU back to Haltech to buy himself time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...