Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Nick, Ben did a [email protected] at Jambo in an RB26 powered R32 GT-R. What's your dirty old pushrod motor got now?

Fastest LS1 in Australia is 6.8, jus sayin.

Of course I have no idea who ben is or what class it ran in!

Edited by Bunta

I said 'your,' meaning Nick's motor.

phew! Thank gawd for semantics :P

Fair enough, in that case compare him to a stock R32 GTR...which is still a good half second faster down the 1/4 :P

Fair enough, in that case compare him to a stock R32 GTR...which is still a good half second faster down the 1/4 :P

Which explains why Chris's v spec was in the high 14 and toms 33 with n1s on it ran identical times to mine.

Yes they can do a 13.0 but nobody will do it cause u might get 3 runs untill u shit something

Fair enough, in that case compare him to a stock R32 GTR...which is still a good half second faster down the 1/4 :P

This is true. I was also alluding to his allegations of RBs being hopeless.

But then you caught out my implied insult to the LS1 :(

Which explains why Chris's v spec was in the high 14 and toms 33 with n1s on it ran identical times to mine.

Yes they can do a 13.0 but nobody will do it cause u might get 3 runs untill u shit something

I have seen with my own 2 eyes a stock one do a 13.2 something and one with a decent clutch and a ECU do well into the 12s.

Those times are....not good. And knowing Chris in particular the launch would have been a softie.

This is true. I was also alluding to his allegations of RBs being hopeless.

But then you caught out my implied insult to the LS1 :(

They could do a 6 second pass, won't change the fact that I broke 2 of them and think they're weak as piss droney horrible sounding boost fed midget motors

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
    • Have a chat with the tuner, you'd want to drive the car straight there.
    • My mechanic installed all the parts and then got it tuned which i think is around the corner from him
×
×
  • Create New...