Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Nick, Ben did a [email protected] at Jambo in an RB26 powered R32 GT-R. What's your dirty old pushrod motor got now?

Fastest LS1 in Australia is 6.8, jus sayin.

Of course I have no idea who ben is or what class it ran in!

Edited by Bunta

I said 'your,' meaning Nick's motor.

phew! Thank gawd for semantics :P

Fair enough, in that case compare him to a stock R32 GTR...which is still a good half second faster down the 1/4 :P

Fair enough, in that case compare him to a stock R32 GTR...which is still a good half second faster down the 1/4 :P

Which explains why Chris's v spec was in the high 14 and toms 33 with n1s on it ran identical times to mine.

Yes they can do a 13.0 but nobody will do it cause u might get 3 runs untill u shit something

Fair enough, in that case compare him to a stock R32 GTR...which is still a good half second faster down the 1/4 :P

This is true. I was also alluding to his allegations of RBs being hopeless.

But then you caught out my implied insult to the LS1 :(

Which explains why Chris's v spec was in the high 14 and toms 33 with n1s on it ran identical times to mine.

Yes they can do a 13.0 but nobody will do it cause u might get 3 runs untill u shit something

I have seen with my own 2 eyes a stock one do a 13.2 something and one with a decent clutch and a ECU do well into the 12s.

Those times are....not good. And knowing Chris in particular the launch would have been a softie.

This is true. I was also alluding to his allegations of RBs being hopeless.

But then you caught out my implied insult to the LS1 :(

They could do a 6 second pass, won't change the fact that I broke 2 of them and think they're weak as piss droney horrible sounding boost fed midget motors

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...