Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

Where on the north side are you?

Missus is in property management so depending on where you are may be able to provide some assitance.

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

That escalated fast!

Every now and then, you come across something amusing in cases. The following happened when an employee was summoned into a meeting. Essentially meeting was an ambush to dismiss him. This is the employer's version: "Mr Hara says that Mr Morton turned up on 5 February 2008 in casual clothing, refused to discuss the various security concerns which Mr Hara wished to raise and said words to the effect that he had a "ball-brushing offer" he had to go and sign and was thereafter escorted from the building."

So much for planned ambush meeting lol

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

not good mr benno not good at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...