Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Car still running like a bag of dicks after putting in some old iridium plugs.. or worse..

Off to superhero or autobahn tomorrow for new spark plugs..

Filmed a video of it but will have to upload via pc

Car still running like a bag of dicks after putting in some old iridium plugs.. or worse..

Off to superhero or autobahn tomorrow for new spark plugs..

Filmed a video of it but will have to upload via pc

yeah do it. so hard to tell what could be wrong with it + im no mech so cant really provide any details technically wise

Plugs I just took out

Looks ok but could be internal

attachicon.gif1384342071762.jpg

have you checked all your piping?

Not all piping and not sure how to tell if it could be a problem or not unless it's a obvious split :/

smoke test will determine if split piping Ed.

I have a feeling its something else though as a bang and then motor running like its being butt f**ked is ringing alarm bells to me.

seriously take it to someone that can give it a quick check up Ed.

Just for piece of mind.

  • Like 1

Yes we are mate. Mum and Bub are in Melb until tomorrow night. How's things are your end?

glad to hear that mate. Everyone is healthy and baby sleeps like a baby......we are astonished at the differences between our first one and Jemma. We so far have it easy.

X fingers it's stays that way ;)

Anyways bed time for me.

All the very best from me to you Scott.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...