Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

no man I don't. Cuz I live on the GC and not western Brisvegas

R I c. I miss mt nebo :( havent even really had a good fang around tambo either since I have moved close (2years) lol

R I c. I miss mt nebo :( havent even really had a good fang around tambo either since I have moved close (2years) lol

yeah Mt Tambo is a nice drive but is heavily monitored theses days and wayyyy to many accidents which does not help :(

 

 

seriously it was sitting at lights when it happen didn't even boost it cause car was still cold.... so from that video you would look for a split ic piping ect?

Sounds very air leaky to me. After looking for air leaks unplug each coil pack. If the idle doesn't change you have found your problem cylinder. Did you say you unplugged the afm and it made no difference? I have had a failed afm and failed wiring to my afm cause issues similar to yours. My money is still on air leak though.
  • Like 1

How hard is a slappa RB30 ?

I now have a metal on metal ticking sound :angry:

I'm thinking I have lost 1 or maybe 2 cylinders, comp test next.

While pulling out the coil packs when running made the car want to stall on all, some didn't change much when plugging back in but did make a change..

PowerFC install stops the car hunting but as the car warmed up and idled dropped it wanted to stall causing it to hunt.

Anyone got a engine crane?

Sounds very air leaky to me. After looking for air leaks unplug each coil pack. If the idle doesn't change you have found your problem cylinder. Did you say you unplugged the afm and it made no difference? I have had a failed afm and failed wiring to my afm cause issues similar to yours. My money is still on air leak though.

Yeah unplugged AFM then started car on stock ECU ran the same harder to start but did run

PowerFC installed to rules out ecu. Am unplugged wouldn't run. AFM installed it runs but missing..

Did the spray carbie cleaner around hoses and intake gasket.. no notable change..

Who can recommend a Mechanic Southside close to beenleigh ? If only ERD was open still.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I live in Quebec. Our license plate slogan is "Je me souviens" Translated is "We will remember" as a reminder to when England conquered us and that we must never forget what they did. Long story short, BSP is unheard of here due to being an English design. I'm surprised our nazi anti english government office the OQLF hasn't kicked in my door yet just talking about it, yet alone imperial anything.       
    • Thanks for that! I did a quick Google search looked up some of hydaulic stores and didn't see it listed on the website, I'll give them a ring. Also found out later that I can buy 2 oem bleeder bolts for 10 bux and come with the washer which I might do so I don't waste the money it costs in petrol to find 2 washers (already did that lol). The old copper washes look in good nick, I drove it after taking it off and putting it back on and didn't see any  Part number here for reference if anyone needs: 14053-42L0A  
    • Piggaz had one and broke it at 470kw 
    • I'm going to assume they flipped it, as the timing setup in the AEM is catastrophically wrong. Once it is fixed, they'll likely need to swap it back to normal.
×
×
  • Create New...