Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Got my self a new exhaust today. HKS Priest, hopefully quiets things down a little.

This is what my car has.....very quiet. A bit flatulent at Idle (I'm sure the GTR won't be as bad). and if its anything like mine, front half is 3" rear is 3.5"

 

This is what my car has.....very quiet. A bit flatulent at Idle (I'm sure the GTR won't be as bad). and if its anything like mine, front half is 3" rear is 3.5"

Good to hear it is quiet. Hopefully doesn't cut power too much. It is indeed 3 inch at the front and 3.5 at the back. Weird! You need the higher flow at the front not down the back.
  • Like 1

Good to hear it is quiet. Hopefully doesn't cut power too much. It is indeed 3 inch at the front and 3.5 at the back. Weird! You need the higher flow at the front not down the back.

Add more boost

no it ain't......it's just right.

You sure as heck don't want to bring anymore

unwanted attention to yourself

Dosent seem loud at all, was about to say you've never heard it but you would of heard it after I gave it a boot full on the road up to QR when i left happy laps and at the drag day.

Side note: the ant eater is in for charity cruise right?

although I never got to hear the unicorn on full song......I never really thought it was too loud but sounded nice :)

It is 112db at idle. When sitting at home you can hear it coming for a solid minute before it gets home! Lol. Its just a straight pipe with a cheap cannon on the end so I always needed to do somthing about it. It was always going to cause me to get fisted by the law at some stage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
    • lol the 2nd one boss, thank you for pointing this out. I feel as i spend more time here this intro message is some thing i will always make me laugh and shake my head at. Perfect Intro:  I have the vehicle  
    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
×
×
  • Create New...