Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

VH45? Great low and mid range. Whack a turbo on to it for top range and all the scissor throwing at dirty LS1....

Get one out there that's a natro, happily walk it's sorry Nissan ass up and down qr all day ;)

VH45? Great low and mid range. Whack a turbo on to it for top range and all the scissor throwing at dirty LS1....

Why would I do that when I could buy a spool kit, whack 2530s on it, still look stock, and punch out 400kw with wicked response!?

I now know fur a fact that he dosent :P

Would like to know what yours does make at 4k though, out if interest.

Prev owner has owned the zed for 15 years :) And went through ALOT of various setups. First dyno sheet on the pile was in safety boost. Last one is gtx2863's.

and what are you going to do to it Mike?

Get it QLD rego first lol

Then plans are, hopefully manage to get engineer approval to run flares and big fuark off wheels.

Then, once I am more used to the power and want more, get some bigger injectors and install my twin 2.5in intake and IC pipes (to and from turbos), and some more boost.

Then, maybe, just maybe the widebody will be closer to being finished the design and mould phase. Then a possible color change along with widebody ;)

Oh and I will be removing the retrimmed interior panels from my red zed and swapping the tweed out of the new one :)

Edited by MagicMikeZ32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...