Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Off to mothers day lunch. Much less crowded today!

How much power will you be wanting once you do the engine Pete?

Its all still up in the air, and its not urgent. 33 ones would probably be adequate though.


Other news, found a cool bit of road to cruise on Sat. Up near Peachester

Could be the one we took on the last north cruise, it is a good bit indeed

Off to mothers day lunch. Much less crowded today!

Its all still up in the air, and its not urgent. 33 ones would probably be adequate though.

If I were you I would keep the $700.

TBH.R33 GTR Brembos are not that much better than what you already have (I consider it a poor upgrade)

Get some new rotors, good pads and off you go.

Save that money and put it towards something else.

Like this for example

http://www.skylinesaustralia.com/forums/topic/439361-genuine-nismo-brembo-f50-brake-kit/

I would of have killed for that ^

hmm, R33 bremos (front only)... 700 bucks, good price?

With the rotors he has thats a good price, I saw them and thought of you strait away

If I were you I would keep the $700.

TBH.R33 GTR Brembos are not that much better than what you already have (I consider it a poor upgrade)

In my experience that is not at all the case at all. Twice now I have upgraded to R33 Brembos from stock gear and twice the results have been good, the first time I had r32 GTR brakes on my R32 GTST and cooked them after 3 laps at Wakefield park, I swapped on my Brembos that night and ran all sessions all day with out getting fade once. In my current car I have never experienced any fading but I have not tracked it. Noel when he was at 450- 500hp also tracked r33 GTR Brembos with out an issue. I think as a mild bolt on upgrade to a R32 GTR or r33 GTST they are pretty damn good if you can get them for the right money.

With the rotors he has thats a good price, I saw them and thought of you strait away

In my experience that is not at all the case at all. Twice now I have upgraded to R33 Brembos from stock gear and twice the results have been good, the first time I had r32 GTR brakes on my R32 GTST and cooked them after 3 laps at Wakefield park, I swapped on my Brembos that night and ran all sessions all day with out getting fade once. In my current car I have never experienced any fading but I have not tracked it. Noel when he was at 450- 500hp also tracked r33 GTR Brembos with out an issue. I think as a mild bolt on upgrade to a R32 GTR or r33 GTST they are pretty damn good if you can get them for the right money.

I'm not saying they don't work, as they are indeed better than standard R32 GTR brakes (but only marginally) - I was merely stating that in comparison to paying $700, he could save most of that and just replace the pads and rotors i.e. Ferodo pads and RDA rotors ($228 all up) and see how it goes.

I just know that for any Skyline (especially Skyline GTR's) bigger brakes are always welcomed considering their weight.

I think a good set of pads and good rotors will work fine for occasional track days.

However, when you have a 350+rwk to go with the package, I know I like the idea of having something larger than R33 Brembos to stop me, and I presume will also help cut lap times down (not that I've ever done that)

Just my two cents thats all

The margainally part is what I am getting at. I wouldn't consider it marginal at all! Its about a 30% larger heat sink and a 40% larger brake pad. In an ideal world I would go for big ass brakes but for 700 bucks r33 brembos with more or less new rotors are very hard to beat

The margainally part is what I am getting at. I wouldn't consider it marginal at all! Its about a 30% larger heat sink and a 40% larger brake pad. In an ideal world I would go for big ass brakes but for 700 bucks r33 brembos with more or less new rotors are very hard to beat

Yeah, I understand what you mean.

I remember going in my old boss STI which had the big 4 pot Brembos and he stomped on them on purpose (cuz I told him to lol) and I was impressed.

So much so, that I actually purchased a set for cheap from an MY05 but never fitted them on (because new dog bones would have to be made up and the rear piston calipers diameter were in fact smaller than the standard R32 GTR)

But was cheap for everything especially back then!

Yeah any time you need dog bones made up you need to ask if it is all really worth it. That's when you go big straight up!

pretty much what I did man.

From standard 4 pot to AP six pot

Love it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...