Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Something to do with the injector upgrade :( Might have disturbed the 20+ year old wiring :(

Z32 injectors are constant 12v, and fire when earthed, so possible that there is an earth leakage somewhere :(

I hate electrics :(

Something to do with the injector upgrade :( Might have disturbed the 20+ year old wiring :(

Z32 injectors are constant 12v, and fire when earthed, so possible that there is an earth leakage somewhere :(

I hate electrics :(

That's such a stupid way to fire...silly Nissan.

Could buy like 5 33's for it.

A mate bought a 33 last weekend, cost him 4k I think. Pretty decent stock condition with just a cat back. Paint a bit average.

Sounds about right for a rough stock one.

Afternoon all. Diet is going well, haven't died from it as yet. Food is actually quite tasty :)

Mike, have you tried dropping the 555s back in and seeing how it idles then?

Want to avoid doing that until I have exhausted other options, as I'd have to re-cut and re-solder the connectors again to old style.

Want to avoid doing that until I have exhausted other options, as I'd have to re-cut and re-solder the connectors again to old style.

Fair enough then. Are any of the injectors faulty? I guess you won't be able to tell unless you pull them out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...