Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

I'm calm...but Chris is offering to let me take his GTR into uncharted territory...it's likely to spin a big end due to the surprise of actually being driven :P

Hey it get driven at least once a week on average now. Before it was lucky to come out once a month

Hey it get driven at least once a week on average now. Before it was lucky to come out once a month

By driven I mean smashing up a mountain at 5000-6000 rpm the whole time.

You bringing her out the the drag day Chris?

thread is useless without Smarties sexts or I call bullshit

You feel unloved? I've heard all about their sexts, Zane has even received a couple! You're missing out Ants, missing out! :P

You feel unloved? I've heard all about their sexts, Zane has even received a couple! You're missing out Ants, missing out! :P

sif that be true

You've a grip on Zane like vice now :P

  • Like 1

Moaning!

So a zedder down south has just finished getting his E85 tune. Propper built vg with 28RSx2 and full breathing mods.

Prelim dyno sheet looks thik this:

post-33729-0-62188700-1410993408_thumb.png

final results are:

18 psi - 430+rwkw (580rwhp)
24psi - 470+rwkw (630rwhp)
27psi -26psi - 492rwkw (660rwhp)

Take that into your backface rb's :P

Also, I spent an hour last night installing my new splitfires and denso iridium plugs, so that is a couple of things off the checklist before Sat.

Other things to do are:

check catch can isn't full and the filter on the top is still good

make sure the oem rear wheels with mickey t's fit over the brakes (confident they will but don't want to drag them all the way there and not have them fit).

Edited by MagicMikeZ32

Moaning!

So a zedder down south has just finished getting his E85 tune. Propper built vg with 28RSx2 and full breathing mods.

Prelim dyno sheet looks thik this:

attachicon.gifuntitled1.png

final results are:

18 psi - 430+rwkw (580rwhp)

24psi - 470+rwkw (630rwhp)

27psi -26psi - 492rwkw (660rwhp)

Take that into your backface rb's :P

Also, I spent an hour last night installing my new splitfires and denso iridium plugs, so that is a couple of things off the checklist before Sat.

Other things to do are:

check catch can isn't full and the filter on the top is still good

make sure the oem rear wheels with mickey t's fit over the brakes (confident they will but don't want to drag them all the way there and not have them fit).

ok

By driven I mean smashing up a mountain at 5000-6000 rpm the whole time.

You bringing her out the the drag day Chris?

Was hoping to be able to come down and spectate again this year but will be working unfortunately

Was hoping to be able to come down and spectate again this year but will be working unfortunately

thats ok, just give the key to Uncle Natro he will take it down the strip

People are assholes. I am sitting here waithing for the service centre at nundah to open so I can drop my car off. I went up the street a little and found a park to wait it out. Old mate rocks up in his dmax, his solution? Just double park and block half the road for 20 minutes. Dick.

Even I am taking the purple snot rocket down the track Andy, you should still at least come out and watch.

Watch the Skylines get annihilated, by Z cars and V8s..... Not by purple Silvias though :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...