Jump to content
SAU Community

Wanted: R33 Skyline Series 2 Gts Return Bov Pipe

jhall82

By jhall82,
in Wanted to Buy

 Share

Recommended Posts

RANDY Veteran

RANDY

Posted
Posted

Err stock BOV return line is metal.

veGeFUK.jpg

Well, I assume he's talking about the short bit of rubber (2-3inches) that joins that metal pipe to the metal outlet of the BOV?

I think I replaced mine with a silicone item, and it's just a straight piece. If that's the bit you need (OP), just go to an auto store and buy the right ID size pipe, (sold by the metre usually) and cut it to size.

If that fails, go to supercheap or some shop like that an look through their pile of radiator hoses. I'll bet a small car uses something that size for coolant or something.

Blackkers Experienced

Blackkers

Posted
Posted

If you have the standard GTST BoV use a straight silicone joiner 28mm. If you've got a GTR BoV get a straight reducer 38mm to 28mm. Search ebay theres a guy in Sydney called ProFlow or something

protecon Contributor

protecon

Posted
Posted

Well, I assume he's talking about the short bit of rubber (2-3inches) that joins that metal pipe to the metal outlet of the BOV?

I think I replaced mine with a silicone item, and it's just a straight piece. If that's the bit you need (OP), just go to an auto store and buy the right ID size pipe, (sold by the metre usually) and cut it to size.

If that fails, go to supercheap or some shop like that an look through their pile of radiator hoses. I'll bet a small car uses something that size for coolant or something.

Granted, except they asked for "After return pipe from BOV to turbo inlet for series 2 skyline GTS-t urgently."

A short piece of rubber isn't a return pipe to the intake.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      You sir, big win tonight. Precision never supplied compressor maps in the past and Idk when they started, but it seems they only offer for a few of the older gen2's which is exactly what I have. I punched in some numbers and seem to have gone with the wrong turbo. 600-700whp isn't in the most efficient area and is close to the choke line. 800whp is well off the map. Punching the numbers into a 68mm gen2 turbo map is bang on in the center. Here I was thinking going smaller would shift the power band down, but in reality it would just make it so much worst due to my rev limit. I would have never thought. 
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Increasing overlap will bring the torque down earlier (and make your idle sound sick lol). Worth a shot (if you dyno time) to experience a bit (providing you are confident your valves won't kiss your pistons). Is to just take off 5 degrees across the boosted area of the map, and then retard the exhaust cam let's say, 3 degrees at a time and then overlay all the runs with VCT on all the way and VCT off as soon as you make positive pressure. Ideally you would have a total of 6x overlays to looks at 0 exhaust & VCT off once manifold pressure is +ve 0 exhaust & VCT on all the way -5 exhaust & VCT off once manifold pressure is +ve -5 exhaust & VCT on all the way -10 exhaust & VCT off once manifold pressure is +ve -10 exhaust & VCT on all the way Just leave your O2 wideband closed loop on for all of the boost area & RPM, and hopefully there isn't too much fuel correction needed and the Haltech is fast enough to compensate (I do this, then apply the correction to the main table). Getting that overlay data should give you a good indication of what to aim for.
    • PranK
      iPad gauge cluster

      By PranK · Posted

      So, my main limitation here is that the car does not have an oil pressure sensor by default, just a switch. As part of my tune I bought an oil pressure sensor upgrade so I now have access to oil pressure levels and logging rather than just the boolean behaviour of the switch but this means I need to use the tuning app to display this value. So, this rules out using any other app on the iPad. The app will also flash when pressure drops which is a nice feature. I have replaced the centre screen with an Android one, which is awesome for Android Auto, but I think it might be too far away and out of my line of sight. I might add some gauges to it this weekend and just see. I guess if its just temp and oil pressure I can make them massive! 🤣  
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      This is what the look like normally. Except we only got the 2 doors locally
×
×
  • Create New...