Jump to content
SAU Community

Recommended Posts

The turbo I brought is modified but I know next to nothing abit it apart from it's been modified, if there is anyone in canberra who could check it out take it for a drive etc , basically tell me what I have got please give me a pm or post an we can go from there, not asking for freebees just seone who is local an knows there stuff.

I'm new here by the way and am looking at going to dubbo to swap a vu ls1 ute for another hot skyline as I'm having a great love affair with my turbo ,my first. Any help would be appreciated an reciprocated , of anyone who's been there an knows what there looking at could tell me what been done to my current, an if it's sooner rather than later advice at what to look for on this 7k or swap in dubbo.

I'm not looking for a handout just an eyes on opinion.

Cheers

Daryl

Hi Daz, Is your skyline an R33 or R32? are you southside or norhtside?

most on here could tell you the bolt on mods from sight

and yes, it would be good to know what the seller advertised.

most list there mods but if they didn't I'm sure some one could help.

pics of engine bay (multiple angles, and the turbo), dash, and underneath at the exhaust and inside wheel arches.

wont be able to tell about the engine internals from external.

Remove passenger side kick panel and there will be an ECU - take a pic.

[Edit] - oh and I wouldn't buy another one just yet. Skylines have a way of draining your money ;)

Edited by Sinista32

Sorry it sat in my yard for 6 months

Photos can do I know it's got coil overs but can they a just hight or just stiffness.

Turbo or injectors or even boost I don't know but the plumbing is first rate I'm told front mount inner cooler.

Just got to find them also how do u post pics

Cheers

Daryl

O 431691940

The on I'm looking at this is the description an it's white body perfect

R33 Nissan skyline series 2 gtst turbo! Hks 3' exhaust front mount cooler, boost tee, running 11 psi very quick car... May swap for a v8 or somthing of interest 0488002609 no over seas buyers!! Has double din DVD player Posted with eBay Mobile also has 10 months rego

Mods!

*3inch hks exhaust

*turbo smart boost tee

*pod filter

*split fire coil packs (only a month old)

* new eridium plugs (also only a month old)

*t3 turbo high flowed to t4

*044 in tank Bosch fuel pump

*new alloy radiator and twin thermo alloy soround

*18 inch rims with 95% tread on front and about 40% on rear

*drift bov

Had to relist as the person didn't show I'm wanting a ute so a v8 6 turbo or turbo diesel ute or inboard ski boat

Posted with eBay Mobile

Thx

Daryl

Nice post Mik, I've never seen that ... worthwhile stuff.

Daryl I'm not the person to help you mechanically, many more in here better qualified than I, but welcome to the world of Skylines ... I'm sure you'll get hooked like the rest of us. Someone once told me that when it comes to Skylines, the more mods you have/do the more time it will spend off the road and the more you'll have your hand in your pocket.

Regardless, enjoy the ride mate ...

Cheer mate thx anyway an the link was helpful but offer still Stands, if you know your stuff and could test drive I'm open to it, my number is there and I'm enthusiastic just never had a Japanese car before nor a turbo , I'm green as

So local opinions or any are appreciated .

Have a great Labor Day holidays guys and lasses.

Cheers

Daryl

Cheer mate thx anyway an the link was helpful but offer still Stands, if you know your stuff and could test drive I'm open to it, my number is there and I'm enthusiastic just never had a Japanese car before nor a turbo , I'm green as

So local opinions or any are appreciated .

Have a great Labor Day holidays guys and lasses.

Cheers

Daryl

Daryl with the car above that you are looking at, make sure it has a tuneable or chipped ECU

If it doesn't then I personally wouldn't bother. Reason being is that it sounds like a throw together job. If they have been running it like that for a long time then the engine will be pretty worse for wear.

I spoke with the guy yesterday he has current Dyno

Papers for the car getting 254rwkw @11psi ,I did ask him if

He had boosted the turbo higher an he said not without getting it retuned.

I'm going to ask about the ECU today , but I'm guessing it has.

Lucky bugger know the only dynotuner in town an to prove power output or just give it a run on the Dyno for numbers cost him nothing

To get it tuned 600$, I. Can't get near a Dyno for under 1200$ here in canberra.

The car is a 98 model btw , an I've got nothing to do next weekend so might, take the ute for a run an take a look.

Who have you been talking to? Every tuner i have been to doesn't even nearly charge that.....

Currently 3 tuners with running Dynos (that are worthy): ESP, Autotech and ultimate tunes. They won't charge you nearly that much.

Edited by Anfanee

Any of those 3 that i mentioned ^^

I think it's around $180 ish to get your car dynod just to have a look at it from those places. Give those shops i mentioned a call and just compare the prices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...