Jump to content
SAU Community

Recommended Posts

No that's the rub I'd have to buy it , there are a lot cheaper ones around so ill have to look into it, but those tune results I posted the other day were my car with a programable ecu an a tune, that's all that's missing from getting into the 280rwkw range, but he said 230-240 would be safe as houses to run with the current running gear already there.

Daryl it really depends on what you want out of it.
Best bang for buck is going to be the nistune.

I honestly think you need to sit down and work out exactly what your plan is.

Otherwise you are going to have all these mismatched parts and no idea of what you actually want.

Set yourself a goal and then research how to get there.

Are you looking to get to that power goal the easy and cheap way or the safer and more expensive way.

I made the mistake of focusing purely on power and neglecting handling, braking and general maintenance.

This left me with a 250kw car that feels like shit to drive these days.

Parts need to talk with each other or else they're just junk in the trunk huehue.

I suggest talking with someone (with knowledge) and aim for a power outlet - If you're wanting 300kW then ask a specialist on what supporting mods you need to get that.

Figure out what you want in the end game and work towards it - it's not a cheap journey.

cheers

Edited by RosieR34

Just got hold of the guy that did up the car, he spent 13000$ on it

It has an adjustable arm on the antenuator to a just boost so a just nut back toward cabin lower , towards front end higher boost , he had it tuned with the stock ecu with the tune stats I posted an has a 12.5 quarter mile printout ,

2 cowboys owned it between him to me, in a 5 month space of time , turbo is high flowed an will handle 18psi but he only ever had it at 11.

so if they didn't mess up to much in that 5 month gap , I'm on a good thing

Nitrous?

Blanked off hole in the crossover pipe would be a sign of nitrous use.

That can flog the crap out of a motor, especially if the timing isnt retarded at least 5 degrees.

Might have got number wrong but he knew everything, he sold it for 7.5 then 2 goon had it in a 5 month period before me.

But from what ultimate told me yesterday it's all there to put down real power. ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...