Jump to content
SAU Community

Recommended Posts

Was hoping to see if we could get a bit of feedback on any N/A mods that will provide noticeable results on the 35 ? As far as ive looked at for mine im thinking transgo shift kit, Kinetix manifold/tube/filter, exhaust but not sure how much of it or which brand/brands because i want not over the top noise, no drone, and a nice note.

Anyone run a different set of gears in the diff ?

Link to comment
https://www.sau.com.au/forums/topic/433029-proven-na-mods-to-v35s/
Share on other sites

I guess when you want to run an N/A daily with simple mods to make it a bit sharper and just enjoy so that hopefully you can spend up on the more ridiculous toy in the garage it does sound a little boring to some folks.

I drive a 300gt sedan. Factory 0-100 is 7.5 seconds. After doing the transgo shift kit, a stillen exhaust and swapping the diff to a manual 350z track diff I was running 0-100 in 6.7 seconds. The diff swap and transgo were definitely noticeable.

Nice mate cheers for that,mine is a 5 spd auto coupe and seems you can see at least a second off 0/100 times and definately sharpen up the response , im trying to just improve it all round.... snappier, better handling and braking, traction etc... probably run the 18" rays 350z wheels for extra rubber and possibly the Z's Tokico shocks and springs.... 5 grand max all round and noticeable results with complete reliability and then focus on the more stupid and less used ride in the garage.

Does seem that most info and parts availability knowledge for these cars is ex US and seems we are about to see another dollar rate to our benefit soon.

Nice price mate thats what im after, affordable results and i agree on the z rims id like to run the factory 5 spoke18" wheels just to allow the jump to an 18 with decent 245's rear and 235 fronts and retain a semi factory look at the same time.

VQ25DET or VK45DE :-)

I recall seeing a writeup of a company that mangaged to squeeze a VK56 into a 350Z, so that is do-able if you have enough $$..

But now we are getting silly! :)

The VR38 is just a VQ anyway. The only decent suggestion so far has been the VQ25det but I don't want you guys to get your hopes up, they are a rare engine...

Anyway, off topic, as the OP won't spend the moneyz on an engine swap, engine build or decent mods. He just wants the generic g35 bolt-on feel-good parts.

What's the bet he buys a poopcharger?

OP

In seriousness. You won't get all that much performance out of the vq35de with bolt on stuff. You'll make it noisy, and it might feel faster, but it's not going to be a rocket. That being said, the order to do things is some form of plenum mod, be it a spacer, or plenum top, then exhaust and high flow cats. Leave the airbox the fk alone. Headers are ok, but expensive in cost and labour for the benefit. That's where to leave it unless you really want to plow some money into it.

Well yeah i guess im not actually after bulk power increases so in effect the Kinetix manifold cat back and a transgo shift kit plus the lsd upgrade and uprev tune would
probably get me what im after....effectively just a more responsive and slightly better sounding 35.... i see 5 grand as reasonable if i include the upgraded wheel tyre combo
and seems like that would be close all up.
If i was after bulk power and forced nduction etc i wouldnt have bought a v35 im happy with a smooth nice handling daily so i can get on with my other car too...anyways
cheers for any helpful info.

+1 for hks turbo kit My car drives like a normal v35 until 3k rpm then hold on In saying that I would recommend supercharger as turbo is a pain in the ass start to finish as I'm sure Scotty would agree. Kinetix velocity manifold transgo and decent hi flow cats with uprev is the way to go if you're sticking NA and I found the K&N panel filter gained 5kw before I went FI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...