Jump to content
SAU Community

Recommended Posts

post-65459-0-96578500-1381407394_thumb.jpg550RWHP - 340KW AT ALL 4 R32 GTR selling my R32 GTR very quick car, reliable, and has further potential. the engine was rebuilt by previous owner, with all work done by ADVAN perfomance in sydney, and i have had about $15000 worth of work done at CNJ motorsport in underwood QLD. i have receipts for all of the work i have had done and from the previous owner. mods include. engine - crank balanced and micro polished arp rod bolts rods unknown? trust 8.6:1 compression forged pistons upgraded valve springs trust 272 deg cams trust adjustable cam gears trust 8L sump extension and 26 row oil cooler and relocated oil filter custom catch can alloy radiator full trust T78-33D Turbo kit 6BOOST steampipe manifold trust drag spec 115mm thick intercooler kit trust 4'' drag spec exhaust trust type r blow off valve splitfire coils trust pod filter in custom alloy airbox fuel system consists of a surge tank and twin bosch 044's in the boot with braided hose running to the engine with an alloy rail, sard fuel reg and 880cc seimens deka injectors. battery is an odyssey item located in the boot in a custom alloy holder along with the pumps and surge tank. drivetrain, suspension - custom exedy twin plate 1000hp clutch r33 gtr vspec gearbox TEIN coilovers trust strut tower braces front and rear wheels and brakes - WORK xd9 gunmetal 18x10 +17 NITTO nt05 275/35/18 tires in good condition slotted dba rotors and track spec pads body - garage saurus style fibreglass front lip standard gtr kit everywhere else with the rear wing removed bonnet lifted with washers to let turbo heat blow through paint in pretty good condition with only a few little scratches which have been touched up electrics and interior - Autronic SM3 ecu apexi electronic boost controller 4wd controller a large array of trust guages to keep an eye on engine vitals kenwood head unit 2 sets of pioneer splits and an alpine sub with 2 amps

asking $26000

contact Ben on 0413853519

or email [email protected]

car located in woodburn

northern nsw near Ballina

or hour and a half south of the gold coast

post-65459-0-54102800-1381406142_thumb.jpgpost-65459-0-10568600-1381406153_thumb.jpgpost-65459-0-81701300-1381406166_thumb.jpgpost-65459-0-51334800-1381406198_thumb.jpgpost-65459-0-99439200-1381406231_thumb.jpgpost-65459-0-54570000-1381406315_thumb.jpgpost-65459-0-03238500-1381406367_thumb.jpgpost-65459-0-88254000-1381406377_thumb.jpgpost-65459-0-02986100-1381406395_thumb.jpgpost-65459-0-97990700-1381406412_thumb.jpgpost-65459-0-68561100-1381406427_thumb.jpgpost-65459-0-63984600-1381406441_thumb.jpgpost-65459-0-69492400-1381406469_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...

. Would you be interested in swap for 2005 bf xr6 turbo. Has 320rwkw, 6 speed sports shift auto, clean, has almost 150000km comes with spool rods, cp pistons, arp studs, big actuator. Has a full exhaust, valve springs, injectors, fuel pump, oil feed line, zip kit in gearbox for firmer shifts, DVD player installed but haven't made the appointment for it to be wired up yet, gauges on dash, plazman 800 cooler, hot side cold side pipping, currently running on 13psi. If motor is built (parts supplied) it will handle 1000hp claimed by spool. Vic rego until November

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201449
Share on other sites

it looks in the pics as though the bonnet doesn't sit flush with the guards near the wind-shield?

do you still have the boot spoiler?

do you have a dyno sheet? i'm interested how the trust single setup compare's to -5's or -7's at a similar power level.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201469
Share on other sites

it looks in the pics as though the bonnet doesn't sit flush with the guards near the wind-shield?

do you still have the boot spoiler?

do you have a dyno sheet? i'm interested how the trust single setup compare's to -5's or -7's at a similar power level.

bonnet spacers mate for hot air to escape

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201486
Share on other sites

bonnet spacers mate for hot air to escape

hmm, look's retarded, and in the under bonnet pic there doesn't appear to be a spacer on the bonnet hinges, but at least easily changed if that's the case.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201581
Share on other sites

hmm, look's retarded, and in the under bonnet pic there doesn't appear to be a spacer on the bonnet hinges, but at least easily changed if that's the case.

Can actually see the spacers fine mate. You just need to look properly. To me looks like bit of washers used as spacers but can definitely see something there.

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7202063
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...