Jump to content
SAU Community

Recommended Posts

hi guys having dramas again

today i attempted to hook up my greddy emanage blue it is brand new and i got the adapter loom for the ecu so i didnt have to splice into wires and what not just wanted plug and play, anyway after plunging all in and reconnecting battery tryd to turn over and it wouldnt fire, then i noticed a electrical burning smell so i quickly disconnected battery and went looking for the problem couldn't find it anywhere so disconnected the emanage and plugged the ecu back in now it wont fire with that ether, so did a error check and im getting error code21 (ignition signal) and error 34 (knock sensor). Checked the coils and they are getting 12v, gnd and signal with 0.4v with ignition on and fluctuates when turn key?????

does anyone know what the hell i have done and how to fix

all help will be much appreciated im happy to pay someone if theres anyone who can help or knows someone who can help me fix it im on the north side of brisbane cheers guys

thought someone might have an idea of what could have cause so i could go looking or if there was an auto elecy on here i could pay to look at it thats all im chasing

It's a saying. Any time you can smell electrical burning.....it's probably too late.

I got it, my old TAFE teacher always used that saying... and he used to quote this alot "best thing since sliced bread and condoms!"

OP - take to any auto electrician as it will be cheaper in the long run then diagnosing over the internet..

just to wrap up the thread turns out im the only person lucky enough to all 6 coil packs die at one which caused the code 21 that coupled with the afm carking it was why it wouldnt start and the code 34 just disappeared so we are putting that down to its female and was just being temperamental cheers anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...