A31 Cefiro 2 Way Diff Center Into A R32 4 Door?

[jdm32r]

will my 2 way out of my A31 cefiro fit into my R32 4 door diff housing i have heard they are the same?

[GTSBoy]

Yup. It is just possible though (seeing as I don't spend any time looking at Cefiros) that they have 3x2 bolt half shafts (like the S chassis cars they are based on, rather than the 5 bolt shafts of the R chassis cars they get their drivelines from). If that is the case then they won't mate up to R32 driveshafts. If that is the case, then depending on the type of 2 way centre, the half shafts that come with the diff may be different lengths to the halfshafts from your R32 diff and swappsies won't work.

You can at least easily check the first condition. If 5 bolt, then no problem. If 6 bolt, then you're going to have to pull stuff apart to find out what's going to work.

Edited October 20, 2013 by GTSBoy

[jdm32r]

Yup. It is just possible though (seeing as I don't spend any time looking at Cefiros) that they have 3x2 bolt half shafts (like the S chassis cars they are based on, rather than the 5 bolt shafts of the R chassis cars they get their drivelines from). If that is the case then they won't mate up to R32 driveshafts. If that is the case, then depending on the type of 2 way centre, the half shafts that come with the diff may be different lengths to the halfshafts from your R32 diff and swappsies won't work.

You can at least easily check the first condition. If 5 bolt, then no problem. If 6 bolt, then you're going to have to pull stuff apart to find out what's going to work.

helpful information thanks