Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm new to the skyline scene. Bought myself a R33 GTS-T not long ago. It's currently completely stock.

I have decided to slightly modify it. However, I'm not willing to spend ridiculous amounts of money on it. I'm basically in need of help as to what mods are the best value for money.

I currently have these in mind:

- CAI

- FMI

- Full exhaust system

- Tune

Please recommend any places in Sydney as well as what you think. Thanks!

Link to comment
https://www.sau.com.au/forums/topic/434174-r33-gts-t-modifications/
Share on other sites

Modifying a skyline and not spending what some would call ridiculous money dont work in the same sentence.

You do realise to tune, you require an aftermarket ecu a chip or piggy back atleast. Bring on the money to he spent.

Fmic

Nistune

Full exhaust

Drive...

Then do maintenance

There is $2k

Im new to the 33 aswell and mine has a full xforce exhaust 3.5 inch and theres a receipt for $860 supply and fitted. The one thing i would say is that dont go for a center muffler type but go for the resonator style on any exhaust for exhaust height clearance.

I had a xforce ( http://www.xforce.com.au/products.php?make=Nissan&model=3) with the oval resonator and excluding cat installed after I was rear ended last year. If I recall it was $900. Doesn't sound too bad just recently replaced stock cat with a steel high flow venom 4.25" cat and it sounds pretty good with it. (Due to over fueling it is now popping flames though). If your going to upgrade the zaust wouldn't hurt replacing your down pipe as well (if still stock) for better air flow.

I would recommend being very patient and compiling a list of mods you want to do. Then research them to death before spending. Worst thing you can do is rush into buying things and have to spend money on the same thing twice. Have a look through the for sale section and maybe pick up some 2nd hand bits. That way if for example you buy an exhaust and you decide its too loud/ too quiet for your taste you can simply sell it for (in theory) the same price you bought it for.

Have a look through the forums. This question has been asked and answered many times. Have a serious think about your goals for the car and go shopping!

PS don't be too cheap with your mods. Do it once and do it right!

Edited by mark33gtst
  • Like 3

Thanks mate. Definitely going to try and build my knowledge base from here!

Theres alot to learn from these forums... ill give you advice from my personal experience. Just spent $5k on my car and the bottom end popped a few hours later. Don't make this mistake - make sure you thoroughly check the engine's health before you start modding up anything :)

First thing to do:

timing belt, water pump

Reason why?

Most imports have had their clock wound back, or clusters have been replaced

Then:

  1. Full exhaust (just get 2nd hand) ~$500
  2. Intercooler of some sort, even a R34 GT-t side mount $100
  3. Hit up Toshi for a socketed stock ECU with a new ROM tuned for AU 98 Octane fuel ~$350
  4. Turbotech MBC 0.8bar ~$30
  5. Fry tyres ~Priceless

First thing to do:

timing belt, water pump

Reason why?

Most imports have had their clock wound back, or clusters have been replaced

Then:

  1. Full exhaust (just get 2nd hand) ~$500
  2. Intercooler of some sort, even a R34 GT-t side mount $100
  3. Hit up Toshi for a socketed stock ECU with a new ROM tuned for AU 98 Octane fuel ~$350
  4. Turbotech MBC 0.8bar ~$30
  5. Fry tyres ~Priceless

Everybody loves frying tires :)

I would recommend being very patient and compiling a list of mods you want to do. Then research them to death before spending. Worst thing you can do is rush into buying things and have to spend money on the same thing twice. Have a look through the for sale section and maybe pick up some 2nd hand bits. That way if for example you buy an exhaust and you decide its too loud/ too quiet for your taste you can simply sell it for (in theory) the same price you bought it for.

Have a look through the forums. This question has been asked and answered many times. Have a serious think about your goals for the car and go shopping!

PS don't be too cheap with your mods. Do it once and do it right!

This times 1000!!! I spent about 20 grand on mine when I bought it. Thinking back now could of saved a lot of time and MONEY by researching more. I would of saved about 8 grand and over a year of time for a better result.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, hard to find and a pain in the ass to change with the transverse engine. I’ve worked on a GTiR before and it’s not a job I’d ever want to do again. theres a company in South Africa that makes RS3 gearbox adaptors for the AWD SR20 including gearbox mounts, so I could modernise it and go a dual clutch with paddles. For now tho, it ticks all the boxes. Super cheap, can throw the kids and their junk in the back, and SR20 that I can turbo cheaply, a CVT that’s not a dog’s breakfast like the V35, and has 80% interchangeable parts with stuff I can source from the wreckers cheaply…. But it’s still unique. I love the wagon back of the Autech version. It’s cheap enough that I can buy another stock manual FWD Primera with SR20VE, swap the gearbox to the N15 pulsar short gear ratio box, swap out the brakes to the R32 ones I pulled off my 32, register it on club plates and take it racing. $1300 shipping from NZ. Heaps of parts and aftermarket builders for transverse SR20’s in NZ.
    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
×
×
  • Create New...