Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm new to the skyline scene. Bought myself a R33 GTS-T not long ago. It's currently completely stock.

I have decided to slightly modify it. However, I'm not willing to spend ridiculous amounts of money on it. I'm basically in need of help as to what mods are the best value for money.

I currently have these in mind:

- CAI

- FMI

- Full exhaust system

- Tune

Please recommend any places in Sydney as well as what you think. Thanks!

Link to comment
https://www.sau.com.au/forums/topic/434174-r33-gts-t-modifications/
Share on other sites

Modifying a skyline and not spending what some would call ridiculous money dont work in the same sentence.

You do realise to tune, you require an aftermarket ecu a chip or piggy back atleast. Bring on the money to he spent.

Fmic

Nistune

Full exhaust

Drive...

Then do maintenance

There is $2k

Im new to the 33 aswell and mine has a full xforce exhaust 3.5 inch and theres a receipt for $860 supply and fitted. The one thing i would say is that dont go for a center muffler type but go for the resonator style on any exhaust for exhaust height clearance.

I had a xforce ( http://www.xforce.com.au/products.php?make=Nissan&model=3) with the oval resonator and excluding cat installed after I was rear ended last year. If I recall it was $900. Doesn't sound too bad just recently replaced stock cat with a steel high flow venom 4.25" cat and it sounds pretty good with it. (Due to over fueling it is now popping flames though). If your going to upgrade the zaust wouldn't hurt replacing your down pipe as well (if still stock) for better air flow.

I would recommend being very patient and compiling a list of mods you want to do. Then research them to death before spending. Worst thing you can do is rush into buying things and have to spend money on the same thing twice. Have a look through the for sale section and maybe pick up some 2nd hand bits. That way if for example you buy an exhaust and you decide its too loud/ too quiet for your taste you can simply sell it for (in theory) the same price you bought it for.

Have a look through the forums. This question has been asked and answered many times. Have a serious think about your goals for the car and go shopping!

PS don't be too cheap with your mods. Do it once and do it right!

Edited by mark33gtst
  • Like 3

Thanks mate. Definitely going to try and build my knowledge base from here!

Theres alot to learn from these forums... ill give you advice from my personal experience. Just spent $5k on my car and the bottom end popped a few hours later. Don't make this mistake - make sure you thoroughly check the engine's health before you start modding up anything :)

First thing to do:

timing belt, water pump

Reason why?

Most imports have had their clock wound back, or clusters have been replaced

Then:

  1. Full exhaust (just get 2nd hand) ~$500
  2. Intercooler of some sort, even a R34 GT-t side mount $100
  3. Hit up Toshi for a socketed stock ECU with a new ROM tuned for AU 98 Octane fuel ~$350
  4. Turbotech MBC 0.8bar ~$30
  5. Fry tyres ~Priceless

First thing to do:

timing belt, water pump

Reason why?

Most imports have had their clock wound back, or clusters have been replaced

Then:

  1. Full exhaust (just get 2nd hand) ~$500
  2. Intercooler of some sort, even a R34 GT-t side mount $100
  3. Hit up Toshi for a socketed stock ECU with a new ROM tuned for AU 98 Octane fuel ~$350
  4. Turbotech MBC 0.8bar ~$30
  5. Fry tyres ~Priceless

Everybody loves frying tires :)

I would recommend being very patient and compiling a list of mods you want to do. Then research them to death before spending. Worst thing you can do is rush into buying things and have to spend money on the same thing twice. Have a look through the for sale section and maybe pick up some 2nd hand bits. That way if for example you buy an exhaust and you decide its too loud/ too quiet for your taste you can simply sell it for (in theory) the same price you bought it for.

Have a look through the forums. This question has been asked and answered many times. Have a serious think about your goals for the car and go shopping!

PS don't be too cheap with your mods. Do it once and do it right!

This times 1000!!! I spent about 20 grand on mine when I bought it. Thinking back now could of saved a lot of time and MONEY by researching more. I would of saved about 8 grand and over a year of time for a better result.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...