Jump to content
SAU Community

Recommended Posts

make sure the adrenlins have the correct spacers as they where not made to suit rwd cars with the 114 offset. if they don't sell them to a riceboy 4 cyclinder chump and go searching for some new mags.

you could risk it but its not pretty when the mags break on at high speed.

Originally posted by skyzerr33

make sure the adrenlins have the correct spacers as they where not made to suit rwd cars with the 114 offset. if they don't sell them to a riceboy 4 cyclinder chump and go searching for some new mags.

you could risk it but its not pretty when the mags break on at high speed.

ermm ok...could you explain what you mean by that though? coz i have no idea....

:P

okay

cars have different offsets on there wheels.

stud pattern if you like. the adrenlins are not designed to fit on the stud offset that the R33 skyline has.

so you need spacers which make them fit properly. if you don't have the correct spacers on the rims to suit the car then the rims can crack snd break from the pressure and movement on the studs etc. Its rare but a possibillity and ROH wouldn't sell me the adrenlins for that reason cause they didn't want me sueing them later on.

with spacers you should have no problems though as evl r33 has them on his car and hasn't had a problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...