Jump to content
SAU Community

Recommended Posts

2860 ~5s with GCG 18psi actuators (the best ones imo) and heavy duty bracket so there's no flex and boost line is very straight with great control with no drop off at the end,i also have modified inlet pipes that bolt to the front of the turbo plus made an insert so there's no step into the turbo which makes them flow like the HKS 2530s and increased spool up dramatically $1500

Ported and flowed and match ported stock exhaust manifolds to maximize spool up $250

Tomei Expreme dumps latest ones used $450

Apexi front pipe dual 70mm into 80mm $250

Power FC for R34GTR with handset $750

Sard 700cc injectors $400

Z32 afm's with plugs in as new condition $400

R34 gtr airbox complete with cold air inlet duct modifed to bolt on z32 AFMs like stock AFMs $300 or $650 with complete with Z32 AFMS and plugs

Stock airbox complete with stock AFMs plus cold air inlet $350 or $250 with out AFMs

Custom alloy pipes to replace the twin turbo pipe just like the nismo style but a 1/4 of the price $450

Drop in Trust cams 264 duration with 9.1 lift $250

JUN oil pump $700 pump has been thoroughly inspected and crack tested the gears are like brand new! i bought a tomei one for the right price so i swapped them over

Trust intercooler 75mm to suit R34 GTR perfect condition $500

For R32GTR there is a brand new Power FC $850

Mines style rocker cover baffels brand new (may be genuine Mines i just cant remember as i bought them a long time ago from justjap) $220

Brand new nitto head gasket 1.2mm thick $300

Engine mount $50

all parts done aprox 6000 klms (unless stated otherwise) made 340 klw at 20psi full boost at 4000 rpm on pump fuel,gone to a single turbo set up now there for selling the lot

located near Gosford NSW i can also meet up on the northern beachs in Sydney

​will post at buyers expense and if you want to pay with paypal thats fine as long a you cover the fees on my end

post-16838-0-42978300-1386501496_thumb.jpg

post-16838-0-67126300-1386501535_thumb.jpg

post-16838-0-71773200-1386501559_thumb.jpg

post-16838-0-00942800-1386501579_thumb.jpg

post-16838-0-81180700-1386501595_thumb.jpg

post-16838-0-01253700-1386501612_thumb.jpg

post-16838-0-08340400-1386502044_thumb.jpg

post-16838-0-94365400-1386502058_thumb.jpg

post-16838-0-26250300-1386502073_thumb.jpg

post-16838-0-06141700-1386502088_thumb.jpg

post-16838-0-90938000-1386502100_thumb.jpg

post-16838-0-67709800-1386502149_thumb.jpg

post-16838-0-15198100-1386502172_thumb.jpg

post-16838-0-37413000-1386502191_thumb.jpg

post-16838-0-90636700-1386502204_thumb.jpg

post-16838-0-33582800-1386503541_thumb.jpg

post-16838-0-85673600-1386503567_thumb.jpg

post-16838-0-28837900-1386503577_thumb.jpg

post-16838-0-07527100-1386503592_thumb.jpg

post-16838-0-42317100-1386504809_thumb.jpg

post-16838-0-00466300-1386504828_thumb.jpg

post-16838-0-44629700-1386504848_thumb.jpg

post-16838-0-00500400-1386504868_thumb.jpg

post-16838-0-35219000-1386504887_thumb.jpg

post-16838-0-92800600-1386504902_thumb.jpg

post-16838-0-18289500-1386504920_thumb.jpg

post-16838-0-13448800-1386504941_thumb.jpg

Hey mate , are the cam baffles for sale? Can't see price or info on the ad. Interested on exhaust manifold as well. Pm me.

Thanks Ryan

Edited by wld093

2860 ~5s with GCG 18psi actuators (the best ones imo) and heavy duty bracket so there's no flex and boost line is very straight with great control with no drop off at the end,i also have modified inlet pipes that bolt to the front of the turbo plus made an insert so there's no step into the turbo which makes them flow like the HKS 2530s and increased spool up dramatically $1500

These pipes and the insert are easily removable and the pic where im holding the short pipe is the unfinished product it was just showing the mesh welded in the part coming from the blow off valves,the pipes look factory after i finished them i will post more pics tonight

The Trust inter-cooler is the older style which were the best by far ( the current ones are made in china i believe) it will work great on any engine making up to 400 klw at all 4 wheels it has cast formed tanks and is perfect for track cars or street cars,when i swapped to the nismo 100mm cooler boost def came on LATER and inlet temps were no different on my MFD

VERY HARD TO FIND THIS VERSION!

For those who wanted to know if the baffels are aftermarket they are actually GENUINE MINES TRIPPLE FLOW items selling as a complete kit

post-16838-0-96123400-1386754072_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...