Jump to content
SAU Community

Recommended Posts

http://www.skylinesaustralia.com/forums/sh...ead.php?t=43555

I have said it many times before...do not even contemplate taking your GTR onto the track if it doesn't have a proper baffle in it. People in this thread have punched a hole in their blocks or spun bearings.

It is not a very expensive thing to do but will save your engine. If you want to do a track day in your GTR, please do up your sump first. Oil cooler is necessary, but will not stop your oil from surging.

Link to comment
https://www.sau.com.au/forums/topic/43640-gtr-owners-read-this/
Share on other sites

Yes, The R won't be seeing any real action till it has new sump with baffles, large capacity oil pump, oil cooler, bigger radiator, oil restrictors, enlarged oil return galleries and catch-can. So by about the year 2010 I think I should be ready.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=43555

It is not a very expensive thing to do but will save your engine.

Apparently the engine has to come out to take the sump off. Does anyone know what it is worth to fit baffles??

Yes, The R won't be seeing any real action till it has new sump with baffles, large capacity oil pump, oil cooler, bigger radiator, oil restrictors, enlarged oil return galleries and catch-can.   So by about the year 2010 I think I should be ready.

you forgotten exhaust, dump pipe. new turbos, big FMIC, 6 pots brakes, etc ,etc :D

To baffle your sump i think it costs around 200-300 done by the mechanic i use. You might find someone to do it for cheaper.

My Trust sump set up was cheap, but that's because I'm a dodgy Asian. I did not do the sump myself as I do not have an engine hoist nor do I have an angle grinder and a welder. Alternatively, you can buy a ready made JUN sump (not the parts to baffle the sump) for about 3 times what I paid for the Trust item.

I have said it many times, engine revs or how many laps are not important. How hard you turn is the important factor. QR has 3 right hand turns alone after the main straight, consider how much the oil would have moved to the left. Then think of the starved engine being revved to pull the car through turn 3 and bang you have a hole in your block.

So far, my mechanic has handed out accurate and invaluable advice to me, although it doesn't come cheap, although his advice regarding the sump was:

"Some people have gotten away without a sump for a couple of track days, but it's a $10k risk you are taking. If you're unlucky, your engine will blow by turn 2."

I don't know where people got the impression that GTRs are track ready from factory. They're far from it. They're a road going homologation of a race car, except the N1s or the special edition GTRs.

You have no idea how many times I thought I have prepared my car for the track only to be told this this this needs to be changed first. Not a cheap hobby nor car to choose for the track.

On a side note, Sydneykid has explained why the GTRs experience higher oil temps, i.e. 2 turbos and mainly because the front diff runs through the sump.

To baffle your sump i think it costs around 200-300 done by the mechanic i use.

Hey rb26dett, who is your mechanic? $200-300 sounds bloody cheap. I NEED to get mine done ASAP and am currently trying to get some pricing.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...