Jump to content
SAU Community

Recommended Posts

Wrecking my S1 R33 GTST '95 - Black in colour.

Car was running 275rwkw.

To save people the trouble if asking, the motor / gearbox / doors have already gone. Most other stuff is still available so ask away if you can't find it below.

All reasonably priced to get rid of it.

Pod filter with adapter Needs new foam $50
Exedy heavy duty 5 puk clutch - needs new buttons holds 285+ rwkw $150
Turbo custom intake pipe $80
Intake manifold $50
Engine wiring loom $150
Custom turbo with internal gate HKS exhaust and Garret internals/wheels. Low mount GT-2876R equivalent $600
Radiator $60
Engine mounts $50
Fuse box lid $20
Radiator overflow bottle $20
Washer bottle and mototrs $25
Aircon condenser $90
Power steering pump $100
Alternator $90
Fuel pump No label but was fine for 285rwkw $100
Clutch master cylinder $60
Manual pedal set $50
Tail shafts $100
Exhaust
Exhaust pipe Blitz 3in $200
Decat pipe Straight 3in bolt on $45
Wheels
Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $800
5 stud hubs Front $100
Spare space saver wheel $50
Suspension
Fronts Stock $75
Rears Stock $75
Front castor rods $75
Front upper control arms $50
Rear control arms $75
Brakes
Callipers Rear $100
Discs Front $50
Rear $50
Handbrake hub assembly With rear cables $150
Master brake cylinder $50
Exterior
Body Shell $350
Front reinforcement bar $120
Rear reinforcement bar $100
Rear bar Stock $100
Side skirts Stock or type M? $100
Rear pods Veilside $70
Spoiler - Series 1 No stop light and scratched $50
Bonnet Black - resprayed $180
Boot Black $100
Front wheel liner Front RH $20
Series 1 tail lights Rear LH $80
Rear RH $90
Indicators Side - clear pair $60
Interior
Seat Recaro worn on one side from getting in and out $160
Rear seats $50
Floor carpet $50
Instrument panel Standard black good condition $100
Centre console $20
Shifter cover $25
Heater core New 3 years ago $50
Heater controls $50
Headliner $50
Boot trim $50
Gear Brand new leather boot & surround $30
Handbrake leather boot Brand new $15
Gages Taco - 4in with shift light $60
A pillar twin mount $40
Boost - HKS with solenoid $60
Steering wheel Just wheel - needs recovering $50
Airbag $100
Pillar trims LH $30
RH - hole from gauge wiring $15

post-7819-0-37504900-1387265925_thumb.jpg

post-7819-0-45141800-1387265993_thumb.jpg

post-7819-0-56694800-1387266014_thumb.jpg

post-7819-0-33781100-1387266048_thumb.jpg

post-7819-0-40979700-1387266067_thumb.jpg

post-7819-0-73783400-1387266083_thumb.jpg

post-7819-0-99462300-1387266203_thumb.jpg

post-7819-0-14377400-1387266224_thumb.jpg

post-7819-0-61539700-1387266249_thumb.jpg

post-7819-0-01604000-1387266287_thumb.jpg

post-7819-0-47839500-1387266330_thumb.jpg

post-7819-0-76858500-1387266366_thumb.jpg

  • 3 weeks later...

Im after a few items:

- The climate control panel (off - auto - temp etc)

- Rear bumper if its in good condition

- Carpets if they are decent

- Washer bottle with motors

- Std Intercooler and piping

- Elec Aerial

- Standard Airbox

Hoping for a package price on all this stuff or on what you still have available. I can pickup over the weekend.

  • 2 weeks later...

Got a picture you can post or PM on the HKS boost control?

Hey mate,

It's a HKS boost gauge with solenoid, not boost controller (the list format didn't paste into the post too well).

I can still take a pic if that's what you're after?

Thanks,

Adam

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...