Jump to content
SAU Community

Recommended Posts

There is a seller on ebay (northside nissan) selling GTR Parts including a rebuilt gearbox...located in WA.

Prob not from the same car OP is talking about . I actually bought a used GTR wheel centre cap from them- happy with their service! :) I just found it a bit of a coincedence that its a rebuilt GTR box for sale in WA from a Nissan dealership...

http://www.ebay.com.au/sch/m.html?item=271334208534&ssPageName=STRK%3AMEWNX%3AIT&_ssn=northsidenissan&_sop=16

Edited by Dane
Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/3/#findComment-7265289
Share on other sites

Yes both. The report from Nissan indicating there was nothing wrong with the car was provided a few hours after I handed the car over. The exact same report that apparently indicated the transmission required a full rebuild when it was done for me.

There is no doubt that something in there broke. The noise was horrible when it happened and I have the broken part of one of the shift forks in my possession.

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/3/#findComment-7265474
Share on other sites

  • 2 months later...

I want to clarify a couple of points here.

If Nissan told you that the shift fork broke and it's to high in the gearbox to see well that is complete and utter garbage. If they had the valve body out then the shift forks are staring them in the face, right there you can move them with your fingers. If the selector broke it would fall on your damn face when you removed the valve body. I can't believe that is what they would say.

It is possible that the broken part could have jammed the selector pistons and that is why you had no even gears. Once the broken piece fell out and all fluids were replaced and a clutch relearn was performed it is possible that the car could still drive and shift with 1/2 to 3/4 of a fork. It's not good but potentially it could still shift.

Almost all R35 trans issues can be fixed for under 5K including parts and labor, that includes trans fluid as well. There is nothing to fear here. A selector fork is a little harder but you will definitely still get away well under 10k. I have a complete R35 trans on the shelf here I would have changed over for you for under 10k. These prices are out of control, you can't go to Nissan it's just not worth it.

Edited by g35me
Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/3/#findComment-7320712
Share on other sites

Also a potential answer to the question is that Ford traded your car for next to nothing because of a 47k invoice for repairs from Nissan, they then took it to a competent workshop who bought a new trans for 15k they then swapped the old trans for the new one in around 3hrs as that is all it takes and by lunchtime they had it back on the lot ready for sale and it technically has never been launched. Honestly that is all to easy. And all the talk of trans mated to engines is garbage too.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/3/#findComment-7320713
Share on other sites

  • 4 weeks later...

All very well. You're missing the point though. They didn't change or repair the transmission. I called both Nissan and Ford management regarding the issue (abused them too) and they just defended their conduct. I have emails to prove this.

It doesn't bother me at all, I had fun with it, but it's not fair on the poor guy that pays $100,000 for a car with a problem that's going to cost you extra money you didn't interested to spend. If I could help them out I'd be happy.

I'm no GTR technician, but I asked which shift fork is broken so I could source one myself. I was told they didn't know because you cand see that far back in the transmission. I could only guess it was the first fork from the broken tip I had.

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/3/#findComment-7342618
Share on other sites

  • 4 months later...

Sounds like both you and the new customer got duped by asshole dealers. I worked for them here on the GC for a few months. I left way dodgy, could not look people in the eye and give them the spiel they wanted us to do.

Somebody should make a list of none Nissan dealers- that can service the R35, and if customers, both Aussie delivered and import alike started tailing there cars there maybe they would learn there lesson.

Regards,

Todd

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/3/#findComment-7444702
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...