Jump to content
SAU Community

Subaru Upper Engine Cleaner (Eoi-Mini Groupe Buy)

Missileman

By Missileman,
in Classifieds

 Share

Recommended Posts

Missileman Veteran

Missileman

Posted
Posted

Don't really want to spend $20 a can at my Subbie dealer nor need a dozen cans myself.

So what I purpose is if there are 3 other members who would like to purchase 3 cans of cleaner each @ $10 a can then we have a little group buy from here... http://www.ebay.com.au/itm/271350687700?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

I live southside 4113 so pick-up from my place is preferred.

Any takers?????

Mike.

  • 2 weeks later...
GOD12A Community Regular

GOD12A

Posted
Posted

Heya guys,

I use ThreeBond Engine Conditioner in the workshop and it works as good as the Suby stuff.

I've been told the Suby stuff is just rebranded ThreeBond, but haven't confirmed.

This stuff is available through the local Repco and Burson Auto Parts stores.

126525303616d455f15e65d59ccf30fc1603ab22

Mark :)

simpletool Mentor

simpletool

Posted
Posted (edited)

I just use this now: http://www.supercheapauto.com.au/online-store/products/Nulon-Foaming-Air-Intake-Cleaner-150g.aspx?pid=288071#@cross

Edited by simpletool
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 only blows hot air

      By Duncan · Posted

      Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Dose Pipe Sutututu
      Leaking Rear Subframe Bushing?

      By Dose Pipe Sutututu · Posted

      Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • Duncan
      Wires cut underneath shifter cover

      By Duncan · Posted

      You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • TurboTapin
      Leaking Rear Subframe Bushing?

      By TurboTapin · Posted

      Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • SeanR32GtSt
      R32 only blows hot air

      By SeanR32GtSt · Posted

      Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...