Jump to content
SAU Community

Recommended Posts

hi guys

just looking for some info on single and twin plate to suit s2 rb25det neo manual stagea

I have heard r33 gtr clutches fit

also r34 gtt

can you verify this ???????

pretty much which product codes will fit

also I have around 450hp at all four

which clutch would suit this eg orc 559 , nismo copper,nismo gmax, os giken

at the moment I am running 409d orc but will not last long

say budget of no more then $2,000

so all in all looking on info of what will fit and whats everyones opinions of a great clutch for the horsepower is

as I am doing a lot of track days ,hill climbs and abit of strip work

cheers

A single will do it fine mine holds fine with 340+kw, 6 puck extreme clutch, nice hard launches, what mods have you got done to the neo for your power figs

mods;

cometic head gasket

garret gt35

1000cc inj with billet rail

low mount steam pipe manifold

s/s dump and exhaust

tomei pon cams and gears

port and polished head

plazamamann cooler

niztune ecu

arp studs blah blah blah

running e85

just waiting to finish my forged 30 bottom end

as above I do a lot of track days and hill climbs ... street drivability isn't so much of a prob

What's the turbo come on like with the gt35 on a neo? Nearly went that way but stayed with a 3076 .63 hits like a shotgun when it Comes on and still makes 200kw by 4000 e85 as well only running 17psi ATM chuck up some dyno sheets if ya got some would be keen to have a look, what suspension mods and brakes ya running

Cheers jase

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...