Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wanted to get some information on Tamiya RC cars.

I would love to get in the hobby of building and modifying RC cars and i would like to buy a R32/34GTR.

Where's the best place to buy them from?

How much should i expect to pay for one that's built and ready for use?

How easy are they to get parts for & are they expensive to build?

I don't have the facilities at home to own a real GTR or else i would.. i think this would be a fun thing to play around with in my spare time as i don't really have many hobbies.

thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/436812-tamiya-rc-car-advice/
Share on other sites

Would this one here come with everything needed to build and start using it or would i have to buy a controller or something to get it working?

http://www.ebay.com.au/itm/201002653250?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

I built an electric Tamiya Celica GT4 back when I was in high school

This thing is really epic - has all wheel drive, with front and rear diffs, double wishbone suspension with adjustable oil filled shocks (can adjust both height and damping force with different shock inserts), two servos for steering and motor, polycarbonate body that's painted from the inside, the chassis can also support a R33 GT-R shell...

cost me around $750 back then with all the radio gear. Sad thing is, i loved building it (if you ever build a Tamiya kit, you will see the anal attention to detail the japs are known for), but didnt enjoy actually playing with it, so only ran it a few times and its been sitting in my garage since then

Ahh ok, not as much as I thought. I really thought they would be at the nearly 500$ mark. Sounds good :)

Yeah $300-400 should get you a decent entry level set-up, fine for thrashing around on the street, etc. If you want higher end you'll spend $500 on the chassis easy, then plus all the electronics.

Plenty of good hobby shops around so go in & see what suits. New shells/bodies you can just grab online, easy enough to paint yourself just make sure you grab the tamiya poly carb paints (& you paint the inside of the shell).

I'll have a look on eBay and maybe some shops in Japan.

Any pics of people's work on their rc's would be cool also.

I would be very anal with attention to detail. Can't wait. More motivated now :)

Edited by crissy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...