Jump to content
SAU Community

Recommended Posts

I'm thinking of finally getting my r32gtst tuned and since my family is heading down to Perth in a month I wanted to book it in for then.

Currently on the car:

FMIC

Rb25 highflow turbo

Mbc

3.5inch catback

Before I tune what other mods should I get I'm chasing roughly 300whp.

Thinking of:

3 inch down and dump pipe.

EBC? What's a good/cheap one?

Injectors? Gtr ones with resistor pack or what else will drop in?

Bosh 040

Do I need a fpr?

Should I just ask the tuner to supply the nistune board or am I supposed to get that my self?

Also will the tuner be able to fit injectors/wire up resistor pack + fit nistune and tune the car in two full days?

Sorry for all the questions :)

Link to comment
https://www.sau.com.au/forums/topic/437228-getting-rb20-tuned/
Share on other sites

3" inch downpipe and elbow will help yes.

Which actuator do you run on your turbo ? The RB20 one give more boost.

I never runned a standard turbo with 3in exhaust, but you should get 1 bar with a complet 3 inch exhaust.

That's what i was getting on my ca18 with the 3 inch turbo back exhaust and the standard actuator. The CA runs 0.7b stock just as the RB20.

The EBC is not needed if the actuator is beefy enough to get you to about 1b.

As for the injectors, the GTR ones needs the resistor and a "hack" job on the harness. Not a good solution IMHO. Not the one i would choose if it was my car.

I don't know about injectors dynamics, but deatschwerk and siemens have injectors that are drop in. You just need spacers on the fuel rail for the siemens ones.

The fuel pump is mandatory if you want to keep your engine happy and alive. The oem pump is quite old now, throwing high fuel pressure and bigger injectors at it will get you in trouble pretty quickly.

The walbro is a better flowing unit than the bosch 040 in the pressure range we use. And you might find one with an install kit for your R32.

The fpr is not needed.

For the nistune it depends of the tuner.

If you get it through him you can get some sort of warranty for installation and having the thing to work properly. It's always more comfortable if you work on something you've done. If I were you I'll get it through him.

But does he accept to work on it ? He might want to sell you a link or a haltech or anything else. Check with him before to get a quote.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...