Jump to content
SAU Community

Recommended Posts

ooh yeah, just looked @ Elfin site. Cool stuff there! I know it's dear, but the MS8 looks wicked. Just imagine it with an RB26, 4WD, 6 speed Getrag, 6 Piston AP's...... there I go again, getting carried away! It's a disease!......... hey, jlnewton, can I buy your car once you finish it?

you can buy mine now if you want it.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896024
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Great thing about the 1600 is the low weight and a tin roof for daily driver. Technologically there is little difference to the clubby, and I would happily have both.

Don't get me wrong, there will be a lot of work to bring either up to speed, but I have found few cars more reliable and driveable than a well done 1600.

in the end i think a good clubby would destroy it though, and individuality is all important, hence my effort to make a quick GTS25t on track.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896055
Share on other sites

Clubman v GTR? the clubman will kill a GTR.....

eg Eastern Creek, a quick GTR will be around 1.45, clubmans about 1.41.....and EC is a high speed track, it gets even uglier on a tight track....eg a clubman has done 1.03 at Wakefield

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896151
Share on other sites

I have no idea what they're worth (though I'm guessing $$$$) but in a bike mag I read about a clubman-style thing, based on a Caterham Seven IIRC, that you could option all the way up to twin bike motors (choice of Hayabusa, Blackbird or ZX12R) and 4WD. 0-100kmh in 2.8 sec, and would no doubt lap any circuit on the planet faster than just about anything once setup right. If you're interested I can dig up the article and scan it, might take a while though, I have quite a few bike magazines :D Bolt a turbo to each of those motors, run low boost to keep it reliable(ish), and you'd have a 700hp, 500kg racer ;)

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896443
Share on other sites

Remember the Catheram took the lap record at Nurburgring from either Porsche Turbo or GTR and they were all excited. Good stuf but they are comparing a toy with a car with full comforts so I wasn't that impressed. Still a good drive though. Almost as good ast pete (fats) in the "little renault"

Yeah one of those would be wicked.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896901
Share on other sites

Pete's drive was good until he backed it into a wall at the ring! lol!

I was contemplating a clubman at one stage. The biggest worry was not parts which may need to be fabricated. The instructions given to you may not list the parts which need fabrication because there are a variety of engines which you could fit in there. But most common engine is the 4AGE 16V. I was talking to the guy who distrubutes Westfield kits for NSW and he said at the time the 4AGE 20V was not legal because of emissions testing not conducted on the engine.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896982
Share on other sites

Just got this from the PRB Site, been getting some good sydney stories from Roy now he is down here.

Mmmmm Focus engine, but the 20V is nice too. This has got my interest for a new buildup since I am selling a house in Melb soon and want to tinker in Bris when I get there. Would be a great project with the girly involved.

Now available with 79/00 emissions compliant Toyota 4AGE-20 valve or Ford Focus engines.

[/color]

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896991
Share on other sites

I've been looking around at a few, but the quality of the build varies greatly. Some people seem to think "zip ties" make great structural braces!

A consistent difference with a lot of these kits seems to be the availability of independent rear suspension as an option. My belief that for pure circuit work, a live rear axle will be just as good. Anyone care to disagree?

As an aside, I recall reading about a "Radical" in a Euro magazine a while back. These are along the same lines as a clubman, but full bodied. GSX-R turbo & NA powered I think, and HEAPS quicker than Porsche GT3 RS, Lambo etc... But WAY too expensive for what it is. An Ariel Atom looked cool to, powered by the latest Civic Type R engine.

skylinegeoff, I kinda agree with your thought that a clubman is sort of "cheating" when it comes to comparing with "real cars", by not dragging around all the heft road cars have to.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-906943
Share on other sites

Remember the Catheram took the lap record at Nurburgring from either Porsche Turbo or GTR and they were all excited. Good stuf but they are comparing a toy with a car with full comforts so I wasn't that impressed. Still a good drive though. Almost as good ast pete (fats) in the "little renault"

 

Yeah one of those would be wicked.

Caterham's are absolute track weapons -- 0-100 in 3.4 seconds:

http://www.caterham.co.uk/showroom/sevens/.../superlight.htm

But as you said, that's basically all they are good for: would be horrible to try and use one as a dialy driver.

If you flushed with cash I would probably choose a Lotus Elise: its still hard core, but at least it has a roof! Car and Driver did a track car roundup this month too:

http://www.caranddriver.com/article.asp?se...article_id=8202

LW.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-906974
Share on other sites

Good price, but they are fiercly unreliable at that power level. There is a massive amount done to it though so it would be nice just to have in the garage.

Would be worth it except for the hairdresser image. :)

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-908369
Share on other sites

Most of you would have looked @ that J-Spec Celica, seems a lot of gear for the money, even if it needs a rebuild (that I can do myself if I get excited).

Do you think that's a reasonable car to think about? Are they really designed for that power level? Would I be able to drive it to the track legally?

I've been lookin and thinking, but would appreciate your thoughts.

Or wait for a good Clubman?

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-910644
Share on other sites

My thoughts are its a heavily modified car, so you could spend forever trying to work out what parts might be causing problems, particularly since you didn't make the modifications yourself and I doubt they are documented.

The owner seems to have gone all out... how much of the stuff added actually improves upon the base car you would never know without stripping it all off and trying piece by piece.

As for the legalities, I doubt it could be made road legal even if you were allowed to import it without a CAMS license.

Have you thought of an Evo or WRX race car? A number of these have come up recently and they are quite cheap: you would need a CAMS license to bring them in though and they aren't road registerable. :rofl:

Edit: you could always buy a road legal Evo/WRX/whatever shell and switch all the parts from the JP car.

LW.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-910661
Share on other sites

Most of you would have looked @ that J-Spec Celica, seems a lot of gear for the money, even if it needs a rebuild (that I can do myself if I get excited).

Do you think that's a reasonable car to think about? Are they really designed for that power level? Would I be able to drive it to the track legally?

I've been lookin and thinking, but would appreciate your thoughts.

Or wait for a good Clubman?

I reckon an unknown modified jp celica with a blown motor is among the worst you could buy.

First decide what you want a car for.

If its club/open track days, then maybe buy a stock(ish) jp import.

If you want a quick race car buy something already here and proven like an improved production car - second hand race cars are great value and all the expensive and hard work is already done. Cars like the celica are not eligible for *any* type of racing in australia

If you want a long list of mods to impress your friends buy the celica.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-912061
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...