Jump to content
SAU Community

Happy Laps - Queensland Raceway 22-03-14


Recommended Posts

Thanks SCR48, been registered for some years just not very active sorry......

Dyno day, Which One, Apparently there is 2........

not really planning on the Dyno Day, but will see what happens, looking forward to the Laps though :)

Thanks SCR48, been registered for some years just not very active sorry......

Dyno day, Which One, Apparently there is 2........

not really planning on the Dyno Day, but will see what happens, looking forward to the Laps though :)

The tuned performance one is what a mate and I will be going to..

I thought i would have been the quickest out the at the happy laps if I went. But I will now pass that title over to you after my Downshift towelling you served up lol..

Also you've made it into my sig on SAU [Well half of your car anyway] after we all cruised out to DS together last month

The tuned performance one is what a mate and I will be going to..

I thought i would have been the quickest out the at the happy laps if I went. But I will now pass that title over to you after my Downshift towelling you served up lol..

Also you've made it into my sig on SAU [Well half of your car anyway] after we all cruised out to DS together last month

OK sounds like a blast, might be up for the Dyno as well, just have to see how Saturday Commitments evolve LOL done a few things since last time mainly cosmetic but definately looking forward to the day...... Dan organising the cruise thing again?

Edited by 8MYCASH

OK sounds like a blast, might be up for the Dyno as well, just have to see how Saturday Commitments evolve LOL done a few things since last time mainly cosmetic but definately looking forward to the day...... Dan organising the cruise thing again?

I haven't heard from dan in a while but keen to get a good group out to DS next month if you're back from work at the time... I saw a pretty cool post on Facebook which involved a cosmetic change to your 35.. I definitely like the size and width....

waiting on weather forecast to know if I will be in a fishing tournament or bringing the legume to happy laps, just had it's engine mounts replaced so I'd kind of hoping for a cyclone so I can test out the smoothness... but don't tell my crew.

how late will payments be accepted?

I belive the latest is, don't pay into the bank account this week as there won't be enouhg time for payment to come throuhg, bring cash on the day?

Yup. Takes too long to process and then it becomes a shit fight.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...