Jump to content
SAU Community

Recommended Posts

Units like this need to mounted on the windscreen - not a big deal these days with every other vehicle having mobile phone and/or GPS units mounted there aswell. There are more advanced ones that use sensors on the dash/back window/front grill, but the unit hides away.

You can modify a radar detector to become a detector-detector - this is what the police use and it provides a signal direction too. Most decent units have a shut-off that once it acknowledges that it is being tracked, it will stop detecting to avoid being identified. This obviously only works if there are other cars around. If you're by yourself, it won't matter.

It will pick up mobile radar no problem as they tend to operate continuously and as someone said, the signals bounce off anything/everything. Speed cameras are a strange one - some operate continuously (easy detection), some operate sporadically so you might think its a false signal and ignore the alarm (shopfront motion sensors for automatic sliding doors can set some models off). Lasers are difficult - they hardly reflect off other vehicles, and if it gets pointed at you, you'll be warned as your speed is recorded.

This is all just general knowledge to answer some questions, not specific to the model being sold here.

Just curious, would radar detectors detect Highway Patrol cars jsut driving around?

Reason I ask is that I've been told some HWP cars have radars in their car to detect speed and is mroe or less constantly switched on. Any truth in that?

  • 3 weeks later...

After all of this talk ,are these things any good?

Or, if caught you are in more trouble than just the speeding ticket????

Is there a product out there that gives us a fighting chance if we slip over the limit, without being fined for having a radar detector in our car.

If they have to put up signs saying there is a radar speed detector up ahead , why are we not allowed to have something to detect them ??????

Before you shoot me down, "do not speed" and then "no problem" shit it is hard to stay within a 5k limit with a modern car where 1 or 2MM on the peddle is about 5 kph :w00t:

I have done lots of dumb driving over my life in cars that should not have been on the road and today would be scrapped , F, cable brakes were fun :w00t: the car could go twice as fast than it could stop :stupid:

I do 3500kms per week, I use one and cannot recommend them highly enough, yes they will go off at certain business/servos. yes the police with a handheld need to be locked onto your car for it 2 pickup laser alert, yes it will pickup highway patrol cars with there radar turned on before u see them and yes it will pickup flash for cashes parked on side of road. good luck with sale, good price :)

i just got a speeding fine, he said his laser showed i was speeding, so my question is does this unit tell me if a cop has a radar with a laser before i get in range of it?

Uhh, no.. by definition if you're not "in range" then how is the detector supposed to detect the radar or laser signal? a signal has to actually been seen by the device to be detected. with the laser speed measuring devices cops use today, you will have only ~1 to 2 seconds to drop your speed if you're speeding before they lock in the detected speed, in other words not enough time. Another approach would be to attempt to "jam" the signal by diffusing the laser with noise on the same wavelength buying you another 4-5 seconds to slow down... but not all of these have success in actually working as advertised, and are also illegal. Also note that most detectors are easily detected by police scanners because they emit a signal which can be identified - the only one i know of that claims is not detectable is the Bell XR/STi.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...