Jump to content
SAU Community

Hdi/hybrid Boost, Oil, Water & Exhaust Temperature/pressure Gauges

performance-wise
 Share

Recommended Posts

performance-wise Grand Master

performance-wise

Posted
Posted
Here is our selection of brand new HDI(Hybrid development International) Boost controller kits, Gauges and Rocket Launcher Switches.

HDI are well known in Australia for the quality of their Front mount intercooler kits and EBC's.

Why choose HDI? Check these vids for a few reasons....


- The link next to each item below will take you to our site where you can view pics & details and where you can purchase and pay via paypal with our secure online checkout system.
HDI HYBRID 30psi MECHANICAL BOOST GAUGE - $40.00 delivered - Addtocart.gif
- 52mm (2 inch)
- 270 DEGREE SWEEP
- 30 PSI MAXIMUM RATING
- INCLUDES SEPERATE BACKLIGHT
- CONNECTIONS AND PARTS FOR EASY INSTALLATION
HDI-SBG-M.JPG
HDI HYBRID 30psi DIGITAL BOOST GAUGE - $90.00 delivered - Addtocart.gif
- HDi SBG-D Plug & Play 60mm Boost Gauge
- Day & Night theme
- Peak hold and recall function (with HDI-SEBC)
- Dual read out both Digital & Analogue Display
- Dual Measurement PSI & BAR
- Full 270 Degrees sweep dial provides superb visibility
- Advanced full electronic stepper motor drive
- High Intense light emit diode back light for high visibility
- Comes with mounting bracket
NOTE - This unit is ONLY designed to operate with the HDI-SBC-D (SE) Super Electronic Boost Controller.
HDI%20GAUGE%203.JPG
HDI SUPER BOOST GAUGE TYPE-DR (SBG-DR) - $130.00 delivered - Addtocart.gif
HDI-SBG-DRB.JPG
SPECS:
Size: 60mm(2 3/8in) overall diameter
Power supply voltage: DC10 to 15V(Exclusive for 12V vehicle)
Current consumption: Max :280mA
Operational temperature range: -2°F to + 120°F, -20°C to +60°C(humidity below 80%)
Storage temperature range: 32°F to + 160°F, -32°C to +80°C(humidity below 80%)
Dial colour: BLACK FACE ONLY
Illumination colour: Blue/Red/White
Display range: - 30 inhg-2.5bar(Analogue) and -14.75psi-36.2psi(Digital)
Comes with the components necassary for installation.
SBG-DRIN.JPG
HDI SUPER WATER TEMPERATURE GAUGE TYPE-DR (WTG-DR) - $130 delivered - Addtocart.gif
HDI-SWTG-DRB.JPG
SPECS:
Size: 60mm(2 3/8in) overall diameter
Power supply voltage: DC10 to 15V(Exclusive for 12V vehicle)
Current consumption: Max :280mA
Operational temperature range: -2°F to + 120°F, -20°C to +60°C(humidity below 80%)
Storage temperature range: 32°F to + 160°F, -32°C to +80°C(humidity below 80%)
Dial colour: BLACK FACE ONLY
Illumination colour: Blue/Red/White
Display range: - 40°C-120°C(Analogue) and 104°F-248°F(Digital)
Comes with the components necassary for installation.
MORE INFO
SWTG-DRIN.JPG
HDI SUPER EXHAUST TEMP GAUGE TYPE-DR (SETG-DR) - $150.00 delivered - Addtocart.gif
HDI-SETG-DRB.JPG
SPECS:
Size: 60mm(2 3/8in) overall diameter
Power supply voltage: DC10 to 15V(Exclusive for 12V vehicle)
Current consumption: Max :280mA
Operational temperature range: -2°F to + 120°F, -20°C to +60°C(humidity below 80%)
Storage temperature range: 32°F to + 160°F, -32°C to +80°C(humidity below 80%)
Dial colour: White
Illumination colour: Blue/Red/White
Display range: - 300°C-1300°C(Analogue) and 572°F-2372°F(Digital)
MORE INFO
HDI SUPER OIL TEMPERATURE GAUGE TYPE-DR (SOTG-DR) - $130.00 delivered - Addtocart.gif
HDI-SOTG-DRB(1).JPG
SPECS:
Size: 60mm(2 3/8in) overall diameter
Power supply voltage: DC10 to 15V(Exclusive for 12V vehicle)
Current consumption: Max :280mA
Operational temperature range: -2°F to + 120°F, -20°C to +60°C(humidity below 80%)
Storage temperature range: 32°F to + 160°F, -32°C to +80°C(humidity below 80%)
Dial colour: BLACK FACE ONLY
Illumination colour: Blue/Red/White
Display range: - 50°C-150°C(Analogue) and 122°F-302°F(Digital)
Comes with the components necassary for installation.
MORE INFO
HDI SUPER OIL PRESSURE GAUGE TYPE-DR (SOPG-DR) - $145.00 delivered - Addtocart.gif
HDI-SOPG-DRB.JPG
SPECS:
Size: 60mm(2 3/8in) overall diameter
Power supply voltage: DC10 to 15V(Exclusive for 12V vehicle)
Current consumption: Max :280mA
Operational temperature range: -2°F to + 120°F, -20°C to +60°C(humidity below 80%)
Storage temperature range: 32°F to + 160°F, -32°C to +80°C(humidity below 80%)
Dial colour: BLACK FACE ONLY
Illumination colour: Blue/Red/White
Display range: - 0kg/cm2-10kg/cm2(Analogue) and 0psi-142.2psi(Digital)
MORE INFO
SOPG-DRIN.JPG
HDI DR GAUGE STAND (SUITS ALL DR GAUGES) - $45.00 delivered - Addtocart.gif
HDI%20DR%20GAUGE%20SIDE1B.JPGHDI%20DR%20GAUGE%20SIDE2B.JPGHDI%20DR%20GAUGE%20SIDE3B(1).JPG
HDI WATER TEMPERATURE/PRESSURE SENSOR ADAPTOR - $40.00 delivered - Addtocart.gif
Available in 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm & 42mm
SWTG.JPG
Please PM or contact us if you have any questions regarding these items.

Cheers,
Paul. smile.gif
www.performance-wise.com
www.performance-wise.net
www.yellowjacketscoilpacks.com
  • 3 weeks later...
  • 2 weeks later...
deongster Mentor

deongster

Posted
Posted (edited)

Hi,

im looking at purchasing - HDI SUPER BOOST GAUGE TYPE-DR (SBG-DR)

does it come with a stand? also this one is universal correct?

Thanks!

Edited by deongster
performance-wise Grand Master

performance-wise

Posted
  • Author
Posted

Its universal and it comes with the dash holder. See parts list in the picture below (Item#5):

There is also the optional HDI DR GAUGE STAND for an extra $35.00 delivered with the gauge. (see pics above).

SBG-DRIN.JPG

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...