Jump to content
SAU Community

Recommended Posts

Hey guys, I have here a 1990 Nissan 32 GTR that i need gone as soon as possible.

No Swaps.

1st owner in Australia.
1990 32GTR.
130,416 km
HKS pods.
HKS boost gauge.
Blitz EBC.
Genuine 18'' BBS LM's wheels.
Tien coilovers.
Stock turbos, turbos will need replacing.
Rocker cover seal needs replacing

Car is garaged and has not been driven since turbo has been whinning.
Car was rarely driven.
Always looked after, very clean inside and out.
BP Ultimate always used
Non smoker.

No RWC.
No REG, exp Jan 3rd
Plates NOT included

Need the car gone.

I'm asking $14,000 but im very negotiable

OPEN TO REASONABLE OFFERS WILL BE CONSIDERED!

post-64311-0-45022400-1392699243_thumb.jpgpost-64311-0-21644500-1392699209_thumb.jpgpost-64311-0-09655500-1392699191_thumb.jpgpost-64311-0-75581400-1392699294_thumb.jpgpost-64311-0-21217600-1392699337_thumb.jpgpost-64311-0-06905000-1392699382_thumb.jpg

post-64311-0-60632400-1392699525_thumb.jpgpost-64311-0-22772200-1392699553_thumb.jpg

Edited by .jonno
Link to comment
https://www.sau.com.au/forums/topic/439326-1990-nissan-skyline-32-gtr/
Share on other sites

what's it need for RWC? i'm guessing it's not capable of passing is if your willing ot supply one?

When the car got imported there was no problems getting it a rwc, i just don't have time to get one.

I havent made any changes to the car since

can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

I, and i'm sure other's on here have been burned before with people claiming the car is road worthy, when it in fact needs thousands spent to get it to a roadworthy condition, i can tell from the picture's that it's likely to low, and if the rocker cover gasket needs replacing then it's fair i think to assume it's leaking oil from there, since you've claimed it it should have no trouble passing roadworthy, but there's clearly at least 1, possibly two items that may need addressing in order to get it to pass, what else might be wrong we're not being informed of?

Edited by ttoks
can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

I, and i'm sure other's on here have been burned before with people claiming the car is road worthy, when it in fact needs thousands spent to get it to a roadworthy condition, i can tell from the picture's that it's likely to low, and if the rocker cover gasket needs replacing then it's fair i think to assume it's leaking oil from there, since you've claimed it it should have no trouble passing roadworthy, but there's clearly at least 1, possibly two items that may need addressing in order to get it to pass, what else might be wrong we're not being informed of?

Wrong section, I think your after " brand new cars for sale" section.

can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

I, and i'm sure other's on here have been burned before with people claiming the car is road worthy, when it in fact needs thousands spent to get it to a roadworthy condition, i can tell from the picture's that it's likely to low, and if the rocker cover gasket needs replacing then it's fair i think to assume it's leaking oil from there, since you've claimed it it should have no trouble passing roadworthy, but there's clearly at least 1, possibly two items that may need addressing in order to get it to pass, what else might be wrong we're not being informed of?

You can fork out $100-200 or even ask some of the people on this forum to inspect the car. Best thing to do is get an official inspection, which will outline everything from the body and paint to all engine specific. If you want a cheap but roadworthy car, this would be the way to go. Everybody knows that GTR's dont usually go for $14k, so you would be expected to have a few g's ready for unexpected occurences.

can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

If you think an R32 GT-R you buy for 14k is not going to have a single thing wrong with it, you're absolutely playing with yourself.

If you think an R32 GT-R you buy for 14k is not going to have a single thing wrong with it, you're absolutely playing with yourself.

This is some of the best advice money can't buy!

Great starting point though, GLWS!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...