Jump to content
SAU Community

Recommended Posts

Hey,

Well following my other post where I talked about starting issues, I thaught i would post this as a seperate topic.

Anyway, My R32 Gts-t seems to have random starting issues. Basically when i leave my car in the garage over night. By the morning when i start the car it some times has problems starting.

These problems include..

* Some times wont kick over, so a second attempt is needed

* Some times will start and very slowly build up the revs enough

* Some times will idle very low (100Revs) and i need to stab the accelerator to start it.

Now after doing some thinking, I first thought it was my battery , however I think The battery is fine because accroding to mt turbo timer, the battery voltage is about 13.5v - 14v Which is apparently normal??

As for the instance where it sat at very low revs, I think this maybe because I left the heater/ de-mister on and the car was trying to cold start at the same as trying to run the air con, hence not supplying enough power.

This leads me to think It maybe my Spark Plugs?

Which I have not has a chance to change.

So what Im asking pretty much is, has anyone else had had this problem, and what solutions did you come up with?

Thanks In advanced.

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/
Share on other sites

Yeah, my 32 starts like a **** as well, I have to wait until it is fully primed, then to start it I have to give it gas until it catches, then after that it is fine. will only happen when it is the first start, or when it has been sitting and become cold again. This leads me to believe that I have a dicked cold start sensor.

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-898840
Share on other sites

mines a bitch to start aswell and its always in the garage but this has only happend when i changed the standerd plugs (what eva it came off the show room with) with some NGK's of some sort BP something or other and that was 2K km's ago and its only now started to start regularly so plugs might be the go there.

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-898946
Share on other sites

So in english your saying ...

You had the same problem, you then changed your plugs and your problem was fixed?

ahhh no i HAVE the same problem it only happend when i changed the plugs bcoz i think i downgraded the plugs ill be investing in some platniums soon and i suggest u do the same i dont think having inside or out has an effect.

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-900308
Share on other sites

hmm yeah check ur plugs and all that, i had same issues when its cold in the mornings. clean out ur air filter, and also chuck a bottle of injector cleaner into ur fuel next couple of times u fill up, works wonders. get more km's out of each tank, give it a go.

~anna~

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-901097
Share on other sites

Hmm So much advice..

I forgot to mention, when I drive off the car feels a bit slugish, like just before it comes on to boost it feels like it kinda hits a point and i kinda have to give it more acceleration to get on to boost.

Im pretty sure this goes away after the car has warmed up, and apparently its a common thing (dont take my word for thaugh though).

The car came with what looks like an autobahn pod, so i think ill just replace it.

As for Injector cleaner, ive heard a few bad things about that stuff, like it can stuff up your plugs?

anyone else heard that?

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-901478
Share on other sites

I have the same problem and it seems to get worse with the colder weather. I've tried nearly everthing to erradicate this problem like -

1) clean the AFM, AFC,

2) check spark plugs,

3) check for leakages in the houses,

4) clean all electrical contacts,

5) check TPS,

6) clean the throttle body

7) Test the oxygen sensor

and still no luck But there is still a few more things to check.

Could be leaking fuel injectors or fuel pump - but from my reaseach in other forums it is more related to when you car is at operating temperature then you switch it off and start it up again after ~10mins and it can't idle properly for 2 mins then it becomes ok. But it is still worth trying to test. I was going to test this last week but the ony fuel pressure sensor I could find was $150. Probably cheaper to get a mechanic to test it. If anyone knows where to get one please tell me.

Apparently there is a wax-up(named something like this) idle device used for cold starts. It is situated under the plenum chamber and I can just see it with a torch. Looks like a mission to access it. Anyway I read in the skylinesdownunder forums that one guy replaced his one and the car never had a cold start problem again. :) Something I need to try. Can anyone agree with this?

My 2c of ideas ;)

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-903700
Share on other sites

Thanks for the information. My Car is suffering REAL bad at the moment.

Im going to try and get these bloody spark plugs changed, but its been a hassle to work out the best time/money :S

I have heard of leaking injectors before.

I really hope changing my spark plugs will fix this problem.

Its got me really confused. :S

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-903813
Share on other sites

mindflux: recently i installed a powerfc and retarded the base timing on the cas (its untuned). after i did this the car was very hard to start cold, takes a few hits of the key, take about 5 seconds to get upto idle (800rpm). so i rotated the cas back to centre and its all good now. it might be worthwhile checking that your cas hasn't slipped, or even advancing it a tiny bit to see what that does, just dont advance it too far.

-rb25

Link to comment
https://www.sau.com.au/forums/topic/43985-starting-issues/#findComment-912121
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...