Jump to content
SAU Community

Recommended Posts

Car now priced at 26,500ono

BR,

JH

Hey,

NISSAN SKYLINE 1995 R33 GTS-t ( 10 Months Rego )

 

Engine:

           RB25DET – BRAND NEW FROM EMPTY CRACK TESTED BLOCK UPWARDS.

           Wiesco Forged Pistons And Rings

           Race Doubled Up Slide Pins, Instead of circlips.

           Bored out 20Th

           New Bearings big ends, little ends

           All new seals rear main/complete VRS KIT.

           Valve Stem Seals  

           Head totally reconditioned

           Done 630Kms Since Complete Rebuild

           All receipts and pictures of rebuild for proof to purchaser          

 

XTR GT35/40 Turbo

           Teil 48ml Wastegate w/ Screamer Pipe

           Dyno Dave Tuned Length Exhaust Manifold – Work of art.

           Custom Made Plenum 80ml Throttle Body

           Trust Front Mount Intercooler

           Turbo XS Bleed Controller

           XTR Turbo Blanket

           EMS STINGER 800

           Nismo 770cc Injectors

           Bosch Motorsports Fuel Pump

           NISMO Mechanical 9Plate DIFF (none of this viscous crap)

           5Puk Clutch And Pressure Plate 500HP

           HKS Air Pod    

           Silicon Hoses everywhere the silicon hose from the inlet to the Air pod is $500 alone.

           Turbosmart Blow Off Valve

           

Exterior:

           All new pineapples and suspension

18Inch DTM wheels

           3 ¼ inch exhaust  with trust muffler

           Remote Central Locking

           Full Alarm / Immobiliser

 

Interior:

           Sony CD Player

           Odyessy Batter

New motor has not been dynoed but old motor produced 323rwkw with the same setup reason for rebuild was old motor was tired as it was standard it pushed a bit of oil past the breathers when you got into it. The 323rwkw was on 18psi with the same gear on the worn out motor. Some C16 25psi of boost I would like to think around the 390 – 400rwkw would be achievable being one of the most powerful R33’s on the street everything has a lot more to go nothing is at its limit so anybody looking to further an insane project then this is it. All work by registered mechanics.

 

Everything Is brand new I regret the need to sell especially just after a complete rebuild the car feels great.

Car is immaculate inside and out            

Selling due to the purchase of a house $29,800 ONO

           Please email me at [email protected]

[email protected]

Im neg need to sell.

BR

would it be possible to obtain a dyno graph of kw output... dont take it the wrong way i'm interested in how the drivability is with such a big turbo....do u recieve any boost on the street? if so what rpm does it start screaming.....cheers!

It would be if I had it was from over a year ago and Ive lost it, IF it gets done again soon which it might Ill put it online for everyone.

Boost comes on around 3000rpm and screams about 4,500 - 5000.

When it hits though any gear other then 1st your doing well over the speed limit in about 3 seconds. any one who thinks thats bullshit, can eat my d8ck.

JH

would it be possible to obtain a dyno graph of kw output... dont take it the wrong way i'm interested in how the drivability is with such a big turbo....do u recieve any boost on the street? if so what rpm does it start screaming.....cheers!
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...