Jump to content
SAU Community

Recommended Posts

Ok so ive got a problem with my r33 gtst. While driving along the motor will randomly cut out. It feels like the petrol is getting cut off because if I roll for a couple of seconds with the clutch out it restarts. So I changed the fuel pump (bastard job) for a high flow one and put a new fuel filter in. Still doing the same thing. Any other suggestions?

Link to comment
https://www.sau.com.au/forums/topic/440494-engine-cutting-out-not-overboost/
Share on other sites

Does it only do it when the car is a a certain temp? for example...

My old 94 Bluebird would consistently do this on the same 500m stretch on the way to work every morning. Turned out to be the CAS.

At first it only cut out above 3000rmp when coming on boost, checked all the vacuum lines etc, but then it started doing it under boost. Now it will do it under boost and it started cutting out afer a few minutes just sitting idling. Thats what made me think fuel.

Looks like I might have found the problem. While trying to jump start the car it threw a big spark across the fuel rail from the back of the injectors. Now I just have to isolate it.

Well that didn't work. :-( grrrrr. isolated the arcing and fixed the wiring there but the car is still cutting out after 2-3 minutes at idle. Can't even drive it to the mechanics to let them have a look at it. Running out of ideas. Is there anywhere else that could be blocking the line or something electrical that could be doing this? After cutting out I can't restart the motor straight away. It just keeps cranking over. But if I leave it for a couple of minutes it will re start.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...