Jump to content
SAU Community

R33 Wont Start

EarthShore

By EarthShore,
in General Maintenance

 Share

Recommended Posts

EarthShore Contributor

EarthShore

Posted
Posted

Hey guys,

Yesterday i was driving and my car turned off, I turned it back on and kept driving, however today I was not so lucky. It turned off and wouldn't start again at all. I found out that its not pumping fuel :\ I got this pump 18 months ago and seems odd that it failed so quick. I put my stock pump back in still no luck. The stock pump has been sitting in the shed for 18 months so maybe its bad now too? Any help would be appreciated :)

Regards, Simon

Link to comment
https://www.sau.com.au/forums/topic/440644-r33-wont-start/
Share on other sites
EarthShore Contributor

EarthShore

Posted
  • Author
Posted (edited)

I've only stuck a multimeter in the plugs on the top assembly

The plug on the left gives something like 12 volts and the plug on the right gives nothing. I should have measured the voltage at the fuel pump instead. Is the right plug crucial?

The plug conditions appear to be in good working order.

Edited by EarthShore
Link to comment
https://www.sau.com.au/forums/topic/440644-r33-wont-start/#findComment-7230823
Share on other sites
Mick Mentor

Mick

Posted
Posted

i can check all the voltages or resistances from my plugs and anything related to the pump in my r33 with a multimeter and if you have one you can verify if you have the exact voltages or resistances with yours if you want

Link to comment
https://www.sau.com.au/forums/topic/440644-r33-wont-start/#findComment-7231379
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...