Jump to content
SAU Community

Recommended Posts

Harro,

Item 1: NPC Carbotic Clutch Disc

Price: $300

Comments:

  • Thought my clutch died, turns out my clutch fork was fractured & my bearing carrier was the incorrect
  • Scott from Western Clutch measured it and said it's about 0.04mm worn only, near new
  • Disc is under 2 years old, has had about under 14000 km street driving and 3x track days, car makes under 200kW

Reason for Sale: Downgrade to a lighter disc that's more drivable for the street

Item 2: Toshi Remapped R33 Series 2 ECU

Price: $300

Comments:

  • Difference is day and night, others will understand
  • AFRs super safe, sits about 11.7~11.8 all the way at 0.9bar - has been taken to the track many times
  • Tuned for full exhaust, front mount, healthy fuel pump, and boost at 0.9 bar, ~13psi
  • Please check your base timing, set it at exactly 15 on idle with the TPS disconnected
  • Will install and check your base timing for free if you're local

Reason for Sale: New turbo & ECU

Item 3: Stock R33 Series II GTS-t Manual Radiator

Price: $50

Comments:

  • Decent condition
  • Doesn't appear clogged or anything

Reason for Sale: hast tag becauseracecar lol

Item 4: Stock R33 Series II Front and Rear anti roll bars / sway bars with bushing & brackets

Price: $80

Comments:

  • Decent condition
  • No cracked bushing

Reason for Sale: hast tag becauseracecar lol

Link to other stuff for sale too:

http://www.skylinesaustralia.com/forums/topic/433062-fs-syd-r33-gts-t-part-brake-pads-subframe-collars-wheels-gauge-holder-misc/page-2

Location: Canley Vale, NSW, 2166

Contacts: PM or Reply Here

As always, will trade for beer and/or alcohol too :woot::woot:

Item 5: Stock R33 Series II Stock Turbo


Price: $250


Comments:


  • Comes with elbow
  • Has minimal shaft play
  • No funny oil leaks
  • Exhaust wheel has not fallen off yet LOL

Reason for Sale: hash tag becauseracecar lol


buy my shit, will trade some stuff for:

  • 2x NEW Nitto NT-05 in 255/40/17
  • 6x 1000cc OR 1200cc sidefeed injectors

What has been done to the ECU? Was it socketed for a programmable EEPROM or Nistuned?

hey mate!

Socketed ECU with a reprogrammed ROM

Don't think anyone has installed the new Type 6 Nistune for R33 ECUs yet, I know a few of the Stagea boys have though.

Yeah I have done up a Z32 ECU with a Nistune board... but I thought a quick ECU swap for more boost would be a nice thing. I don't have the cash for a tune (and possibly never will) and i'm maxing out the AFM at 11psi. =-/

MMMMM will the clutch plate work in a jim berry pressure plate

Dooo it!!!!!!!!

Also ECU sold :)

MMMMM will the clutch plate work in a jim berry pressure plate

Can't see why not? After all NPC pressure plates are modified Exedy covers :)

Dooo it!!!!!!!!

Also ECU sold :)

Dammit...snooze you lose :domokun: was about to PM you :( Mayb I should just keep saving and go the way of a PowerFC.. Goodluck with selling rest of your goodies

Dammit...snooze you lose :domokun: was about to PM you :( Mayb I should just keep saving and go the way of a PowerFC.. Goodluck with selling rest of your goodies

buy my adaptronic ECU and it will come with a free modded car for $12k :)

I like breasts

Stock Turbo & Dump $250

Clutch $200

Stock ABS Diff $250

Stock Rad $20

New Braided Oil Feed $50

Stock Front and Rear Sways $40

Stock S2 AFM $50

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...