Jump to content
SAU Community

Recommended Posts

No, how would the computer get power ?

Ha said he can put the ECU into another R3 in the shop as it is easier that way or bench power the unit to install the file.

But if it is a RAM system and there is a battery in it ( I have not been able to find this info out) and the battery is stuffed how would it keep the tune until I get it back into my car, wish I knew more about computers :(

No, how would the computer get power ?

I guess I will find out, I sent the ECU off to Sydney. So I guess I will wait and see what happens when it comes back.

But for the hassle it causes even if it seems OK I will change it and I will go the Haltech Pro

What ECU was it, they might have a plug that will give it power that they can down load the tune, they just won't be able to check it

How did you lose the tune ?

Apexi ECU , they were going to use another car if they had a R34GTR there or power it up on the bench, so they must have something they can use?

I was coming home from Sydney after the new turbo, cam and new tune was done. had traveled about 300Kl, going great, like a new car, I was loving it, on a real twisty bit and having a bit of fun and the car cut out for a second or 2 and when the turbo kicked in it was shit, between 1500 and 3500revs before full boost it was fine, found a spot to pull over and the idle was rough and noisy and it conked out. Checked everything I could see and nothing seemed to be off or leaking, 45Kls from home, in the bush so I babied it home,the end :)

I will have the ECU back today, I will put it back in and see what happens.

Taking it back to Sydney next week for the Haltech Pro R34GTR, while I am there I will get a new exhaust system and fuel system and hopefully make it back home this time,haha

That sounds like an intake gasket blowing, I have had two Apexi PFCs one of which for 10 years and they don't just drop a tune like that that I have ever experinced or heard of

When I say check the tune, they would have to have a car with exactly the same mods setup exactly the same way so they can run it up on the dyno

What exhaust are you looking for, I have an bolton 80mm cat back blitz or apexi, can not remember ATM, I took of my 34 I'm selling cheap :D

Also have a chat to unigroup about their Blackbox or insight with his new EmTron, both of which I would consider better value for money

That sounds like an intake gasket blowing, I have had two Apexi PFCs one of which for 10 years and they don't just drop a tune like that that I have ever experinced or heard of

When I say check the tune, they would have to have a car with exactly the same mods setup exactly the same way so they can run it up on the dyno

What exhaust are you looking for, I have an bolton 80mm cat back blitz or apexi, can not remember ATM, I took of my 34 I'm selling cheap :D

Also have a chat to unigroup about their Blackbox or insight with his new EmTron, both of which I would consider better value for money

I am booked in for all of the work to be done.

I do not know about the gasket blowing, but when we went on Face Time with the FC hand commander the settings were back to original tune , the car was running VERY rich, rough and noisy at idle and we went through it, changed a few settings and got the car running OK and I changed the plugs, they were BLACK! I guess I could have just waited for the ECU to come back with the tune reloaded and just drive it hoping that it was a once off, BUT I have a lot of trouble getting to Sydney and will do all of this at once and get it over with.

If they used another R34 I would think they would just take the other ECU out, plug mine in and reload my Tune from their files , pull it out and replace the other ECU.

I have been after more torque down low as the car was a shit DD the way it was. As you can see from the Dyno last time Brown and the old Dyno Blue that it is getting much better :)and I expect a little better again this time.

I have the exhaust being custom made , I want it free flowing but not too loud, I am in a small town and once you get targeted, your stuffed :(

post-134126-0-87214300-1399593062_thumb.jpg

I have never heard of most things on SAU :)

BUT just installed the ECU and took it for a run, all good, well for now

He sent the hand unit back in case I have trouble on the way to Sydney, hope I do not have to unwrap it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, new members can't post pics until they reach a certain post count. If I get a chance I'll promote you to full member, if @Prank or someone else doesn't get there first.
    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
×
×
  • Create New...