Jump to content
SAU Community

Recommended Posts

Previously on my S15 which produced 477.3 rw kws from a 2 litre. Never used on the road or drag, just dyno and shows. Should produce well over 500kw on a 6 cylinder (RB/JZ motors) In mint condition - almost brand new, lucky to have 1000km on it. NOTE: non roller bearing - RACING VERSION from HKS. The last model before the roller bearing version was brought out.

Previously on my S15 which produced 477.3 rw kws from a 2 litre. Never used on the road or drag, just dyno and shows.  Should produce well over 500kw on a 6 cylinder (RB/JZ motors)  In mint condition - almost brand new, lucky to have 1000km on it. NOTE: non roller bearing - RACING VERSION from HKS. The last model before the roller bearing version was brought out.

All i can say is OMG!!!

is it just the turbo itself or the whole kit?

CONAN, YOU OBVIOUSLY DONT KNOW WHAT A HKS T51R IS WORTH. A FULL T51R KIT IS WORTH WELL OVER 9K AUD NEW. JUST THE TURBO BUDDY, NO MANIFOLD OR GATE. LOOK AT DEANS POST "T51R SPL BB GTR KIT", HE'S SELLING FOR 6500 ONO 2nd hand.

i have a fmic, airfilter, bov, turboback zorst, and bleed valve,

what else do i need to make this turbo work with my system?

i have a rb25det

say i want it to spool quick and hold boost for long, without killing me engine etc.

help would be great

CONAN: The HKS T51R really isnt the right turbo to go with your cat back exhaust and air filter. Look at the power rating on this turbo, as per BMT's posts above and it should be clear to you that a full engine build would be required on an RB25 to have any hope of sustaining the power that this turbo can produce.

i have a fmic, airfilter, bov, turboback zorst, and bleed valve,

what else do i need to make this turbo work with my system?

i have a rb25det

say i want it to spool quick and hold boost for long, without killing me engine etc.

help would be great

:D :D :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:

Remnis, do you have the dyno sheet that your monster produced?

Yeah, what Nick said... this turbo aint for the faint hearted :headspin:

Wouldn't mind seeing one of the more experienced members grab this a get a new project goin :aroused:

hay man i was just wondering i got a s15 getting pistons and rods dun.. got cam gears and cam shafts and other nick nacks.. what sort of lag would i get?

and if you had to sell it would you sell it with the manifold and front/dump pip and wastegate with it ?

hay man i was just wondering i got a s15 getting pistons and rods dun.. got cam gears and cam shafts and other nick nacks.. what sort of lag would i get?

and if you had to sell it would you sell it with the manifold and front/dump pip and wastegate with it ?

If you wanted this T51R for your S15 i can sell the turbo and manifold only - dump pipe and front pipe should bolt straight on to your standard one, and the waste gate you will have to source yourself. Lag? mmmm Honestly you will have a hell of a time keeping it on the road. As for lag, with a non stroked sr20 i pushed 477 rw kw @ 1.8 bar at around 8300rpm. This turbo, depending on how big your cams are, will start producing boost at around 4800-5200rpm depending on how good your tuner is. Buy it buy it, i wanna see it street driven daayyym smoke a set of 285s in one burn out.

  • 1 month later...
If you wanted this T51R for your S15 i can sell the turbo and manifold only - dump pipe and front pipe should bolt straight on to your standard one, and the waste gate you will have to source yourself. Lag? mmmm Honestly you will have a hell of a time keeping it on the road. As for lag, with a non stroked sr20 i pushed 477 rw kw @ 1.8 bar at around 8300rpm. This turbo, depending on how big your cams are, will start producing boost at around 4800-5200rpm depending on how good your tuner is. Buy it buy it, i wanna see it street driven daayyym smoke a set of 285s in one burn out.

please e mail me re this turbo [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...