Jump to content
SAU Community

Jecs A15-000J01

BlueRB240
 Share

Recommended Posts

paulr33 Grand Master

paulr33

Posted
Posted

Saturated injectors are used in almost all-standard production, 1998, engines because of the system cost and simplicity. Saturated based systems usually fire all injectors at the same time, once every rotation discharging half of the required fuel per cycle at each event. Some systems fire half of the injectors at one time and the other half at a different time. These systems are called "Batch Fire" and "Semi-Batch Fire " respectively. This system is used in 90 % of all general production engines (cost and simplicity). In almost every case Manufactures will only use Peak and hold injectors in High Performance applications or in Turbo applications. This is true in the Ford/Mazda family, Chrysler/Mitsubishi family, Nissan Group and the Honda/Acura folks as of 1997. General Motors/Toyota cars are also in this same family. OEM APPLICATIONS GM uses Saturated Rochester injectors in everything but some of the High performance cars, hear they use Lucas Injectors, and in the turbo trucks they use Bosch. Toyota uses saturated injectors in everything but its turbo models - all Nippon-Denso. Honda, last year changed all but the NSX to saturated, most all of Keihin make with some IPT. Nissan uses saturated units only, as of this year, Jecs or Hitachi manufactures. Chrysler/Mitsubishi - same deal - all but the turbos are saturated, Siemens or Bendix make. Ford uses Bosch or Nippon-Denso depending on the Model. All are Sat. except Turbo Models. Bosch and Lucas injectors are used in VWs.. BMW , Bosch up until this year, now Lucas --- European cars use an assortment of injectors

Link to comment
https://www.sau.com.au/forums/topic/44224-jecs-a15-000j01/#findComment-905947
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • niZmO_Man
      Lock up the old for sale / wtb threads.

      By niZmO_Man · Posted

      Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • Duncan
      Unpeeling the Orange

      By Duncan · Posted

      That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...