Jump to content
SAU Community

R33 Series 2 Head With Tomei Cams+ Stock Bits

AngryRB
 Share

Recommended Posts

AngryRB Grand Master

AngryRB

Posted
Posted (edited)

Looking to sell my Series 2 Head with Tomei Cams in perfect condition, only selling cause I need a NEO head for the 25/30 build.

Looking for $700, Cams have had very little use ( cost me over $800 alone) and engine has always had 170psi each cylinder so its a good head and cam package.

Note- parts still on car so give me a few days to dismantle once sold....

stock exhaust from turbo to exhaust tip $100

Stock Turbo in VGC - $300 includes some lines and intake pipe

Stock S2 AFM- $ 80

Stock wheels with tyres $350 ( 2 have brand new tyres)

Stock injectors in rail $150

All negotiable within reason, all in perfect condition parts located in south Brisbane, 0466 257 118 or private message thanks

Edited by AngryRB
  • 4 weeks later...
AngryRB Grand Master

AngryRB

Posted
  • Author
Posted (edited)

Head + cams $500 , have bottom end too, but cylinder 5 is down on comp,

stock exhaust from turbo to exhaust tip $80

Stock Turbo in VGC - $250

Stock S2 AFM- $ 60

Stock wheels with tyres $300 heaps of tread

Stock injectors in rail $80

CAS ( near new) $250

Edited by AngryRB
  • 2 weeks later...
AngryRB Grand Master

AngryRB

Posted
  • Author
Posted (edited)

bump..will do head and CAS for $700 with new timing belt.. bolt it on and fry tyres!

forgot to mention the key on the exhaust cam broke off, but never made any difference or else it wouldn't have been used.

got 320kw with this head on 16psi.. so it works and proven, no smoking etc.

anyone with a good RB25 neo head im happy to negotiate a swap

Edited by AngryRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...