Jump to content
SAU Community

Recommended Posts

I am about to send my Stagea to have the mods tuned .

I have heard it is a pain to tune auto`s ! , but have also heard that some tuners can LOCK the autobox in 3rd for tuning !! ??

Is this possible or an old wifes tale

Link to comment
https://www.sau.com.au/forums/topic/442621-running-auto-box-on-a-rolling-road/
Share on other sites

I am about to send my Stagea to have the mods tuned .

I have heard it is a pain to tune auto`s ! , but have also heard that some tuners can LOCK the autobox in 3rd for tuning !! ??

Is this possible or an old wifes tale

No if you try to tune in 3rd it can kick down suddenly.

Select 2nd - that cuts out 3rd and 4th.

Turn on the "snow" switch - that cuts out first.

Now you can tune in 2nd.

BTW is it a 4wd rolling road? If not you need to remove the front driveshaft or your transfer case can suffer damage. Pulling the AWD fuse only works on the R32GTR not on a Stagea.

What did you end up using for an ecu or are they going to provide and fit something?

Thanks for the info - very useful

Unfortunately in the UK IT SEEMS ( disclaimer ! )

Tuners are more snobby about what they tune and what they tune with !

EG ....

We only tune GTR35`s

We don`t tune Auto`s

WE don`t Tune that system

So I have found a tuner that will roll my AWD Auto - I have brought a HKS F-con iS -

because HE can tune HKS F-con !

the optional OSC cant be used according to him ,

and he will have to fool the ECU signal to the MAF - he has stated that the usual z32 MAF upgrade cant be used !?

and I have `pig`ed` it in with an R34GTT HKS NP5-8 loom .

Thanks again for the info

HKS F-Con should be able to read the signal from a Z32 AFM ok. The stock AFM can only read enough airflow for about 225kw whereas the Z32 is good for about 350kw. A tuner can work around this up to a point by estimating numbers but if a Z32 AFM is available it should really be used. I guess you are lucky to have found a tuner with the software to tune the F-Con at all! Good luck! (BTW what is an optional OSC?).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...