Jump to content
SAU Community

Tablet In A V35 Anyone?

Chris Rogers
 Share

Recommended Posts

LineItUp Collaborator

LineItUp

Posted
Posted

I was planning to buy a 7 inch touchscreen/controller off ebay, one of them has dimensions that are within a couple of millimetres of the M35 screen casing I have (I have a spare though, so if I need to file a bit off it, it isn't the end of the world).

I was looking at running an android box without using miracast; otherwise I'd have just used a chromecast and casted my screen; the plan was for onscreen gauges (have an obdlink wifi mx coming one of these days), sygic for sat-nav, and XBMC for android for media.

But I'm going to see how much the above solution costs; as it lets me get rid of the awful Sony double din head unit that is in my V35.

damangm Contributor

damangm

Posted
Posted

Yea looking at a similar setup except it would connect directly to the phone through the newer cables that can provide HDMI out while providing charge to the phone. Connect to the mimicsx2 via Bluetooth for the touch screen. But yea still haven't measured up the existing screen with what is available as a replacement screen which adds the touch overlay and allows HDMI direct access

  • 2 weeks later...
cruiser_350GT Rookie

cruiser_350GT

Posted
Posted

hi LineitUp, any updates?

I'm working on something similar as well. I have bought a new Fascia and AC control kit from Amazon. Have a double din kit on its way from ebay.

The idea is to use the lower half for the 2din kit and replace the pop-up screen with a 7" tab. However, after measuring up the casing for the pop-up fittings, i'm finding it difficult to find a tab that would be good.

Also, how do you plan to have the OBD data displayed on the tab? Coz, my v35 is does not work with any OBD protocols at all. The connector is OBD, but apps like torque keep saying that they can't connect.

Any ideas/ suggetions would be appreciated.

180j Enthusiast

180j

Posted
Posted

Great link Chris cheers!

Been looking at a tablet install atm. Been trying to get a second hand fascia to modify.

I was just going to use an ipad mini.. mounted landscape just scraps in to where the existing bose is (with a little modifying)

Then break out cable direct to the cigarette lighter and aux cable to the amp.

Or a breakout cable for both and wiring in a volume control.

cruiser_350GT Rookie

cruiser_350GT

Posted
Posted (edited)

hi Chris,

googled a whole bunch of crap about HKS OBlink and the kits that come with it. Saw the prices too. and none of them confirm that it works the way we want it to.

Just about ready to shoot myself in the head!!

Mate, should i be considering an ECU replacement for just this reason? (ie: displaying live engine data while driving)

Edited by cruiser_350GT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • thomasLait
      New Stegea Owner

      By thomasLait · Posted

      Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • TurboTapin
      New fix for low tyre pressure from bmw

      By TurboTapin · Posted

      CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...